Side marker light?

MY SRT8 HEMI · 01-22-2013, 07:57 PM

I have a question the side marker lights on the front bumper on a 06 SRT8 are they supposed to light up or blink or anything?...lol

**Sodak** · 01-22-2013, 08:36 PM

Yes they should ..I know mine light up with the lights on ..but i can't remember if they blink.

MY SRT8 HEMI · 01-22-2013, 08:39 PM

Ok mine are out then..lol...any ideas what bulb they take? and how you get to them?

**Sodak** · 01-22-2013, 08:58 PM

The connector just twists in ,don't remember the bulb size and there are numerous ways and all of them suck.you can put the car on jacks and remove the belly pan,you can put the car on jacks and remove the front bumper,and then there is the way i did it. it's not fun either ,turn your wheels all the way left and then pull out the three push/rivets that hold your fender linner to the facia, reach in and turn the marker light till it pops out , then sgueez your other hand in there and remove the bulb from the holder ,then reasemble.

cwhite2005 · 01-22-2013, 09:04 PM

I just replaced mine and I used an LED 194 bulb. Mine do not flash they only light up with the headlights but I have a 2005 300c with an SRT8 fascia..if that makes a difference.

**MADDOG** · 01-22-2013, 09:05 PM

They don't blink but they do come on with the parking lights and headlights.

MY SRT8 HEMI · 01-22-2013, 09:06 PM

Thanks was it hard to change?...any tips...lol...Actually car is at the body shop to get a grille installed and a new headlight..wonder if i should call them to install 2 new bulbs...

**MADDOG** · 01-22-2013, 09:08 PM

One way is to remove the front wheelwell splash guards, bend them back a bit and reach in there to pull out the old bulb and put in the new one.

Another way is to remove the underbody tray and try to reach up to pull them out.

Lastly, I changed mine out when I had the front fascia off for a new grille. So my change out was easy.

gary0006 · 01-22-2013, 09:14 PM

My connector is stuck, any suggestions.

Thanks

Quote:

Originally Posted by Sodak

The connector just twists in ,don't remember the bulb size and there are numerous ways and all of them suck.you can put the car on jacks and remove the belly pan,you can put the car on jacks and remove the front bumper,and then there is the way i did it. it's not fun either ,turn your wheels all the way left and then pull out the three push/rivets that hold your fender linner to the facia, reach in and turn the marker light till it pops out , then sgueez your other hand in there and remove the bulb from the holder ,then reasemble.

**MADDOG** · 01-22-2013, 09:17 PM

There is a small threaded #6 palnut holding them in place. Give it a twist.