Thanks guys.
Maddog the video seems to work, please try it again.
Heres a quick over view:
I used 4- 1ft Radiantz z-flex 1mm led strips, had them wire them to sequence. They come with a tube that they slide into to make them waterproof, I had them send me the length of tube I needed to fill in the rest of the channel where the chrome strip was. I used webelectric universal STS-1 sequencing modules wired to the back(so they would not get wet) turn signals. Ran about 50ft of a security wire that had 4 wires bundled in its casing (home depot) though the cabin and firewall to the front signals.
Of course you have to remove the chrome strips from the bumpers. All sounds fairly simple while writing this, and I guess it is, it just takes more time than it sounds like.. And I did it in sections:mirrors, front, then rear.
Here's a thread on the mirrors
Latest mod, Sequential signals in mirrors
What is really cool is the mirrors are not connected to the STS modules and they are sequencing at the same rate. I was afraid they would be out of timing with the rears, but their not, VERY Happy about that.
Oh, I forgot to mention that I painted the wires on the led strip black so you couldn't see them in the tube.
Oh, and I installed load resistors at each socket and removed the stock bulbs..
If anyone wants more info let me know.
Thanks again
Linear Mode
