JBA Dyno Day/M&G - Sept. 30th

[Mighty Noid]

Ok it is set. JBA Headers will give us the whole day for dyno'ing at there speed shop in San Diego, CA. Well they will open the doors at 8am and close at 3PM.

You do not have to dyno your car to come.

About the dyno machine that they use at JBA.

It is at load-bearing dyno from Dyno Dynamics. It uses an electro-magnet with two rollers and is set down into the ground. It is very accurate and is good up to about 650 rear wheel horsepower or 160 mph. Current weather data (temp, humidity and baro pressure) are entered into the dyno software and it accounts for changing conditions.

Also you can have whatever set-up on your car as well. If you have Zoomers, Corsa, or whoever that is fine. You don't have to have JBA on your car for this.

We must have at least 10 cars to dyno to get the price lock in at $45.00. You will get two runs and a color print out of the runs. There normal price is $90.00 for this.

They are going to provide us with lunch (BBQ - hamburgers and hot dogs) and drinks.

One major rule that you all have to obey. If you can not do this, please do not show up to this event.
NO BURNOUTS AT THIS LOCATION!

If you try to do one, you will be ask to leave right then and there. NO EXCEPTIONS!

Here is the address:
JBA Race Center
5155 Convoy St
San Diego, CA 92111-1207

Let me know if you can make it by signing up on this thread.
Name - City - Type of Car - Forum - Dyno (Yes/No) - How many people you will bring with you

Example:
Mighty Noid - Oxnard - Charger RT - LX Forums - Yes - 1

I am also working on discounts for that day or a giveaway of something.


RE-EDIT:

Also there is a cut-off of 20 cars for the dyno. If we go over I can put you on a waiting list.

We can have more than 20 cars at this location.

[Mighty Noid]

PEOPLE FOR DYNO LIST:

1) Mighty Noid – Oxnard - Charger RT - LX Forums – Yes - 1
2) SRTOUT - San Diego - SRT8 300C - SRT8OC Forums - Yes - 2
3) inferna – Oceanside - SRT8 Magnum - LX Forums – Yes - 2
4) Hemi_Charger - San Diego - Charger RT - Charger Forums - Yes - 1
5) SDCARGUY - San Diego - SRT8 Charger - Charger Forums - Yes - 2
6) FF2MOE - San Diego - SRT8 Magnum - LX & SRT8OC Forums - Yes- 4
7) RandysWay - Temecula - Charger Daytona GoManGo - Charger Forums & LX Forums - Yes - 1
8) Bud - Chula Vista - SRT8 Charger - Charger Forums - Yes - 1
9) Ozzie - N. Hollywood - SRT8 Magnum - LX Forums - Yes - 1
10) Painmed - Temecula - SRT8 Charger - Charger Forums - Yes - 1
11) Carla & Kevin Go ManGo!!! - Murrieta - Charger Daytona GoManGo - Charger Forums - Yes - 2
12) BlackSRT8Wagon4SSC - San Bernardino - SRT8 Magnum - LX & SRT8OC Forums - Yes - 2
13) aharner - San Diego - SRT8 300C - 300C Forums - Yes - 2
14) MJR - Huntington Beach - SRT8 300C - 300C Forums - Yes - 1
15) MJR Brother - Huntington Beach - Magnum R/T - 300C Forums - Yes - 1
16) Caligezzer - Huntington Beach - SRT8 300C - 300C Forums - Yes – 1
17) Giznome - San Diego - Charger RT - Charger Formus - Yes - 2
18) Sather - San Marcos - SRT8 300C - LX Forums & SRT8OC - Yes - 2



On the Fence for Dyno:

1) daytona3509 - San Diego - Charger Daytona Top Banana - Charger Forums - Yes - 2 / Work?
2) thewagon - Rialto - Magnum R/T - LX Forums - MAYBE - 1
3) ephines - San Diego - Magnum RT - Charger Forums - Maybe - 1

No Dyno for These People:

1) fatchance - Huntington Beach - 300C - all of them - No - 1
2) SMK HEMI - San Diego - 300C - 300C Forums - No – 2

[Mighty Noid]

List has been updated.

[Mighty Noid]

About the dyno machine that they use at JBA.


It is at load-bearing dyno from Dyno Dynamics. It uses an electro-magnet with two rollers and is set down into the ground. It is very accurate and is good up to about 650 rear wheel horsepower or 160 mph. Current weather data (temp, humidity and baro pressure) are entered into the dyno software and it accounts for changing conditions.


If you have any questions regarding this event, please let me know.

[Mighty Noid]

7 out of 11 are SRT8's!!!! That is great!!!!!


We are going to see some high numbers on that day!!!

[LAIDBACKC]

can someone help me with somethin...

im not a gearhead.....

whats the difference between the short headers and the long headers...?


im assuming the down pipe?

should i just get the shortys for 450? or is the extra 700 worth it?

im clueless on this topic

[Mighty Noid]

LaidbackC...

This thread is for dyno sign ups and not what the difference is between headers.

Please look into this thread...

http://www.300cforums.com/forums/srt...t+tube+vs+long


the search feature is your friend...

[Mighty Noid]

Also I just checked with the JBA and the payments that they will accept is:

Cash

or

Credit Cards (VISA, MC, AMEX and Yes DISCOVER)

For the wondering minds...

[LAIDBACKC]

thanks for the thread!

[Mighty Noid]

no problem...

enjoy the read...