Kicker Sub Woofer Group Buy

[Ted@MPSC]

Hey, just found that ultra secret promo, so the good news is we are able to drop this even lower. We have dropped this to $365.95, and 10 or more equals free shipping!!!

[CJR300C]

Originally Posted by Ted@MPSC

These kits have there own amp, and you will have to run the supplied wiring. It is marketed by Mopar, so you know they are making it so it will work with your factory systems. They may be tapping into the rear speaker wires for the input, not sure though. The power may tap into the rear mounted battery area that is ignition sourced hot, so you may not have to run wires all the way to the dash. Again, we have no clarification on this yet, and are trying to find out the details.

Ted,
Do you know how this will affect the factory BA Sub? Would the Charger Sub Kicker Sub fit in the 300C. I was wondering because that one is a 200 watt powered sub. Thanks for the info.
C

[Ted@MPSC]

Well, to answer your question CJR300C, we don't know. We are being told that this kit will work with ALL FACTORY systems. So we are under the assumption that it will work properly with the factory BA Sub. As for the other question, the housing would be different, as those are vehicle specific. I can't imagine it being much diferent though, still the LX platform. I'm sure the wiring is pretty close, but again we do not know for sure.

[Johnny Vig]

Originally Posted by Ted@MPSC

Well, to answer your question CJR300C, we don't know. We are being told that this kit will work with ALL FACTORY systems. So we are under the assumption that it will work properly with the factory BA Sub. As for the other question, the housing would be different, as those are vehicle specific. I can't imagine it being much diferent though, still the LX platform. I'm sure the wiring is pretty close, but again we do not know for sure.

I will clarify as much as I can for everyone. Hope this helps.

Q. Do you know how this will affect the factory BA Sub? Would the Charger Sub Kicker Sub fit in the 300C. I was wondering because that one is a 200 watt powered sub. Thanks for the info. Answer- No. The kit is specific to the vehicle you have. That is how it is designed, especially the housings.

Q.These kits have there own amp, and you will have to run the supplied wiring. It is marketed by Mopar, so you know they are making it so it will work with your factory systems. They may be tapping into the rear speaker wires for the input, not sure though. The power may tap into the rear mounted battery area that is ignition sourced hot, so you may not have to run wires all the way to the dash. Again, we have no clarification on this yet, and are trying to find out the details. Answer- It will plug into the existing harness located under the rear deck. Power will go to the battery in the rear of the vehicle.

Q. So we are under the assumption that it will work properly with the factory BA Sub. Answer- The factory BA sub will need to be removed when you add this system. The sub amp that is supplied will mount directly where the BA sub is located.

These add-on systems were designed to make it as easy as possible for the customer. You will need to remove the rear seat, side bolsters, and rear parce shelf in order to install everything, but this can all be done in less than 2 hours. It is not intimidating but it does require some patience. The instructions provided should be vey detailed and should also inlcude step by step photos. Good luck everyone, you will enjoy the systemif you choose to go with it.

[Johnny Vig]

Originally Posted by Ahbizmal

My question is... Do you manufacture one for the other side of the trunk? I want another one for the other side.

Nope

[NautcaSprt6]

Originally Posted by Johnny Vig

I will clarify as much as I can for everyone. Hope this helps.

Q. Do you know how this will affect the factory BA Sub? Would the Charger Sub Kicker Sub fit in the 300C. I was wondering because that one is a 200 watt powered sub. Thanks for the info. Answer- No. The kit is specific to the vehicle you have. That is how it is designed, especially the housings.

Q.These kits have there own amp, and you will have to run the supplied wiring. It is marketed by Mopar, so you know they are making it so it will work with your factory systems. They may be tapping into the rear speaker wires for the input, not sure though. The power may tap into the rear mounted battery area that is ignition sourced hot, so you may not have to run wires all the way to the dash. Again, we have no clarification on this yet, and are trying to find out the details. Answer- It will plug into the existing harness located under the rear deck. Power will go to the battery in the rear of the vehicle.

Q. So we are under the assumption that it will work properly with the factory BA Sub. Answer- The factory BA sub will need to be removed when you add this system. The sub amp that is supplied will mount directly where the BA sub is located.

These add-on systems were designed to make it as easy as possible for the customer. You will need to remove the rear seat, side bolsters, and rear parce shelf in order to install everything, but this can all be done in less than 2 hours. It is not intimidating but it does require some patience. The instructions provided should be vey detailed and should also inlcude step by step photos. Good luck everyone, you will enjoy the systemif you choose to go with it.

JV,
If its basically a plug to the rear deck and a plug to the battery, im most likely sold on this.
I will be making my purchase within the next couple of weeks.
Damn vacation, killing my mod purchases

[Ted@MPSC]

Thanks Johnny Vig, appreciate the info.
That was going to be my next call, directly to Kicker for the details.

[Ted@MPSC]

This group buy is being combined with others we have posted on several forums. This will increase the group buying powers.

[Johnny Vig]

If I can get more info I will and then I will post it. Once again, this set-up is designed to be a fairly straight forward up-grade. it will not be mission impossible. The quality of the speakers are also excellent, even though i think most will just opt for the sub at first.

[JustForFun]

Can somebody show me how (a picture) the Kicker enclosure "looks" mounted in a 300C???

Which side is it on?

Thannks!

JFF