Sequence SQ-3 wheels 4 sale

[300C Madd Dogg]

Okay, my girlfriend is badgering me now about not being able to park in the garage (I kicked her out to put the wheels in there) So they really must go now. I will let these go for $2000 picked up or $2250 shipped in the continental US. I paid and have an invoice for $3500. I am losing my ass here, but the girlfriend says they have got to go!!!

-Chris

[Krock43]

As a fellow 300c forum member how hard would it be for you to call the shop that installed your wheels and get me that information on those lugs? I find it odd again that everyone on this forum that has sequence rims can talk about all kind s of technical issues but when it comes to smething as simple as a lug noone can help.

[joey]

Originally Posted by Krock43

As a fellow 300c forum member how hard would it be for you to call the shop that installed your wheels and get me that information on those lugs? I find it odd again that everyone on this forum that has sequence rims can talk about all kind s of technical issues but when it comes to smething as simple as a lug noone can help.

I don't have sequence rims so I can't help you. Try starting a new thread with your question, such as "Lug & Lock question for Sequence rims"

You did ask the question in the thread you started a couple of days ago, but the question was buried in the middle of the paragraph. Readers probably forgot your question by the time they finished reading.

[Krock43]

Thanks Joey; I'll try that although I don't think it will help much. I have pm'd a couple of members on this issue and recieved the run around.

[Fast4Door]

We had to modify a set of lug nuts for my sequence wheels.
Pretty much all we had to do was cut the ends off so that the center cap would fit on the wheel. Sequence should sell these wheels with lug nuts as the correct ones are hard to find.

[300C Madd Dogg]

Originally Posted by Krock43

As a fellow 300c forum member how hard would it be for you to call the shop that installed your wheels and get me that information on those lugs? I find it odd again that everyone on this forum that has sequence rims can talk about all kind s of technical issues but when it comes to smething as simple as a lug noone can help.

Holy crap dude, chill out. I will call them right now. All I remember is that they had to use truck lugs because of the 14x1.5 thread (Chevy truck) I will call them and see if they can get the info, I agree it shouldn't be hard, but up until now I didn't realize it was a damn emergency. Maybe next time just PM me and say hey, if you get a chance, could you call the tire shop and get me the information on your lugs. Thanks a ton I really appreciate it.

A little bit of politeness goes a long way.

-Chris

[Krock43]

Originally Posted by 300C Madd Dogg

Holy crap dude, chill out. I will call them right now. All I remember is that they had to use truck lugs because of the 14x1.5 thread (Chevy truck) I will call them and see if they can get the info, I agree it shouldn't be hard, but up until now I didn't realize it was a damn emergency. Maybe next time just PM me and say hey, if you get a chance, could you call the tire shop and get me the information on your lugs. Thanks a ton I really appreciate it.

A little bit of politeness goes a long way.

-Chris

First of all Chris I have asked politely about the lugs for these wheels! Don't blame me for being concerned about these wheels. You have no idea what I've done to get some information about lugs for these wheels. So shut up and stop blaming everyone else! This forum is supoposed to be here to help each other out. You should want to get the correct info on your wheels. I bet you probably work for Sequence or have some affiliation with them.

[300C Madd Dogg]

Now you are starting to piss me off. I called the tire shop (Big O Tires - 1025 Water Street, Santa Cruz, CA 95060) they are going to call me back with all of the info you would like. Your signature says you already have Sequence wheels on your car, that is why I didn't think it was an emergency to get you the information. As for me working at Sequence you can rest assured I dont. I work at North Pacific Cellular - 710 Front Street, Santa Cruz, CA 95060. You can call me 831-423-9307 work or 831-247-4949 cell and I can answer any questions about the wheels I can.

Thanks
-Chris

[300C Madd Dogg]

And now after having a chance to cool down, I am officially removing these from the for sale section. These wheels are no longer for sale at any price, I will eat the $3500 and I will donate these wheels to some charity that I am sure can sell them without being accused of being a cheat. Thanks a lot to everyone on here who tries to make everyone feel like crap. I am going to put this whole thing behind me and start over fresh. 300C Madd Dogg is gone.

[joey]

Originally Posted by 300C Madd Dogg

And now after having a chance to cool down, I am officially removing these from the for sale section. These wheels are no longer for sale at any price, I will eat the $3500 and I will donate these wheels to some charity that I am sure can sell them without being accused of being a cheat. Thanks a lot to everyone on here who tries to make everyone feel like crap. I am going to put this whole thing behind me and start over fresh. 300C Madd Dogg is gone.

Mad Dog (hmm, now I know why the name? )
You didn't cool down, you heated up. If your girl friend didn't piss you off, why let an anonymous forum member? I am truly rooting for you to sell your dubs, but this forum doesn't seem to be the right place. Folks are not coming to the 300c forums to buy. IMO, the chances of making a sale on this type of forum is slim next to none.
Good luck selling your wheels, but you don't need to leave for good or come back with a different name.