fs 300c tailights

todd0218 · 07-29-2007, 12:51 PM

OK i will use my best description to answer alll questions:
Here is a set left and right 300c tailights complete with the harnesses in the back to plug into a current c or to use for a base model conversion. These lights have been painted with the 3 layers of VHT nightshades and 2 light layers of clear and 1 thick layer of clear. I am a novice painter at best and decided the project was out of my hands and have some slight sag in the vht paint if looked at closely, most of you say this can easily be sanded down and i should try again or if i just polished them they would look great from 5 ft away but this apprently is to difficult for me to do since my painting skills are not good. But these can easily be taken back to the original color with a little bit of sanding paper. These are by no means ruined since i only used 1000 and 2000 grit 1000 to graze the initial surface and 2000 in between layers (both wetsanded).
The one on the left has had an initial hand polish which it for sure needs to be polished better to get super shiny. the one on the right needs the final 2000 grit wet sand and some polish. So my loss is your gain on these tailights leave them as is and polish them to a high luster or use your paint skills and get them up to a jons tinted tail level....
I am asking 95 shipped to your door for these tailights inside USA.

Here is some pictures sag is very hard to see in the paint camera cant really catch it. Again the price is 95 shipped firm.

thank you todd. Feel free to AIM me at todd0218 or email me at todd0218@aol.com . I only accept paypal for my safety and yours, and will ship out as soon as money is received. Send paypal to t2larsh@wmich.edu