Help with GSM fan mod install

[SRT8DRVR]

I have read GSM instruction 10 several times and am confused which small green wire to pull from the connector and splice the fan wire into.

Do I remove and splice into the green wire coming from the lower of the two fan connectors ( that seems more logical to me) or to the green wire coming from the relay block further towards the center of the core support.

I have pics, but don't yet know how to upload.

Got the torque mod wiring installed OK ( raining out, not a good time to test

Thanks

[SRT8DRVR]

Originally Posted by SRT8DRVR

I have read GSM instruction 10 several times and am confused which small green wire to pull from the connector and splice the fan wire into.

Do I remove and splice into the green wire coming from the lower of the two fan connectors ( that seems more logical to me) or to the green wire coming from the relay block further towards the center of the core support.

I have pics, but don't yet know how to upload.

Got the torque mod wiring installed OK ( raining out, not a good time to test

Thanks

Bump..

[DodgeJim]

Where can I find info about these mods (torque & fan)?

Thanks.

[btlfed1500]

Originally Posted by SRT8DRVR

I have read GSM instruction 10 several times and am confused which small green wire to pull from the connector and splice the fan wire into.

Do I remove and splice into the green wire coming from the lower of the two fan connectors ( that seems more logical to me) or to the green wire coming from the relay block further towards the center of the core support.

I have pics, but don't yet know how to upload.

Got the torque mod wiring installed OK ( raining out, not a good time to test

Thanks

When you are standing in front of the car looking into the engine compartment, just to the left of the TB center line you will find a relay facing directly up between the two fans in the shroud. Unplug the harness and you will see a 18-20 ga green wire. Using a 3M T-tap or 3M splice connector tap into this wire and replug the connector.

Richard