Unable to raise shift points with Flashpaq

[Neuro300C]

I searched the forum several times before posting this and could not find an answer. I also emailed Superchips but it is the weeked and I don't expect hear from them until next week so I thought I would inquire here just in case.

I recently purchased a Flashpaq from another forum member (thanks again Hemi Freak) for use on my 07' 300C.

I connected the unit to the internet and updated to v1.11 before tuning the car.

I installed the 91 octane tune, reduced torque management, paddle autokick, raised speed limiter, and set my wheel height. I was not able to adjust the shift points. I get this message; "This options is not available with this application."

I tried using different custom transmissions settings to see if this feature would be unlocked but it never was. Is this option not available on the 07'?

Any ideas would be appreciated.

-Neuro

[crhemi]

Not sure on that one.
May I suggest asking on the LXForum, You may get more feedback there.

[Neuro300C]

Originally Posted by crhemi

Not sure on that one.
May I suggest asking on the LXForum, You may get more feedback there.

Good idea. Not bad to spread it around. Also can anyone explain to me what the difference between the stock and paddle auto kick is. I realize this only impacts use of the autostick but what are the changes. I understand that it will shift at redline automatically but is there any other changes? I cannot find anything in the manual or on their website.

-Neuro

[Northern Rider]

Have you registered on their site and hooked up the Flashpak for a download to match your 07 ECM?

[Neuro300C]

Originally Posted by Northern Rider

Have you registered on their site and hooked up the Flashpak for a download to match your 07 ECM?

Yes as I stated in the OP I updated to v1.11 before tuning the vehicle. According to the software v1.11 is the newest revision.

-Neuro

[Northern Rider]

Originally Posted by Neuro300C

Yes as I stated in the OP I updated to v1.11 before tuning the vehicle. According to the software v1.11 is the newest revision.

-Neuro

Sorry - speed skimming again . . . My Flashpak was for an '05 and had to fiddle a bit with the tranny / shift stuff but was able to boost the shift points.

Don't have any good suggestions other than to talk to the SuperChips guys Monday.

[Neuro300C]

Originally Posted by Northern Rider

Sorry - speed skimming again . . . My Flashpak was for an '05 and had to fiddle a bit with the tranny / shift stuff but was able to boost the shift points.

Don't have any good suggestions other than to talk to the SuperChips guys Monday.

Roger that NR. Hoping it is just something simple. We will see.

-Neuro

[Neuro300C]

Well after looking back through the manual I found a description of the SC preset transmission settings. The sport function does everything I wanted; reduced torque management, paddle autokick, and stock shift points. I tuned back to stock then retuned to the 91 octane tune w/ sports trans, raised speed limiter, and set my tire size. Hopefully this will work for me and I won't have to mess with it further. We will see.

-Neuro