License Bracket

[Undertheradar]

Can anyone tell me if they customized there front license braket to fit under the custom grill. I had a '05 300c and the license plate would fit prefectly under the grill on the front but the '06 SRT8 have an additional opening and can not place the plate lower. I looking for a braket that will not interfere with the look of the custom grill.

[dux]

You can check out the method I used -- at the bottom of this thread:

http://www.300cforums.com/forums/ext...e-bracket.html

It was real easy -- using the factory bracket modified per Mr DJ's template and some plastic zip ties -- clean install, it's held up for months now, and, best of all, there's no need to drill holes in the fascia.

There's lots of other methods out there, too.

Hope this helps

[srt8danno]

I believe he has the new one piece front end with the extra slots under the grille.

Here is a recent thread discussing some no hole options….don’t know if it will help or not. Good luck!


http://www.300cforums.com/forums/ext...ht=front+plate

[DUBSTER]

I just chucked the plastic frame and drilled 2 new holes on the bumper.