Did he know whether or not the pieces you bought were indeed for the 2 piece facia and not the 1 piece facia you have? If so, does he have the pieces you need for the 1 piece facia. G'luck getting this resolved!!!
Did he know whether or not the pieces you bought were indeed for the 2 piece facia and not the 1 piece facia you have? If so, does he have the pieces you need for the 1 piece facia. G'luck getting this resolved!!!
Well it seams that the air ducts are for the two peace. After seeing Rambit's photos, I see the air ducts come with the new belly pan. I am off to my dealer and I will look at one of the SRT there to see if there is anything from the fascia to the air duct's.
__________________
Stock 300 rwhp 352 rwt
Front & Rear SRT Fascia,Hotchkis Sway Bars,BT catch can,power steering cover,and others, Clear side markers.Leather console cover from 22 Elite and Racing peddles, 180 MotoRad stat,custom Engine cover with pin-striping,Corsa Cat Back,K&N Drop in filter,Diablo 91 Tune.
Well it seams that the air ducts are for the two peace. After seeing Rambit's photos, I see the air ducts come with the new belly pan. I am off to my dealer and I will look at one of the SRT there to see if there is anything from the fascia to the air duct's.
Well I guess I was wrong took a look at the SRT and the ducts are there. Just have to fine how they go on. I PM Rambit to see if would take some photo's of his . When he puts his new belly pan on. The mystery continues of the air duct's.
__________________
Stock 300 rwhp 352 rwt
Front & Rear SRT Fascia,Hotchkis Sway Bars,BT catch can,power steering cover,and others, Clear side markers.Leather console cover from 22 Elite and Racing peddles, 180 MotoRad stat,custom Engine cover with pin-striping,Corsa Cat Back,K&N Drop in filter,Diablo 91 Tune.
Well I guess I was wrong took a look at the SRT and the ducts are there. Just have to fine how they go on. I PM Rambit to see if would take some photo's of his . When he puts his new belly pan on. The mystery continues of the air duct's.
I read your PM moddog. I'll jack my car up tomorrow or the day after and have a good look for you. I'll take some pics as well. I'm not intending on taking the old one off yet as my car is stored for the winter right now. Today it's blowing snow & -8 and I ain't about to open the garage door. Stay tuned.
Rambit
__________________ 2009 calendars are ready! Check it out --->HERE
2005 300C SRT8 - #72 of 252 (excl. 11 pilots) - #10 of 35 Canadian SRT8's built 2008 Harley Davidson FLSTF Fatboy - Vance & Hines Big Shots STGD with FuelPak tune. 2008 Jeep GC SRT8 - Custom Build/Custom Delivered by SRT - 1 of 1 in Canada
I read your PM moddog. I'll jack my car up tomorrow or the day after and have a good look for you. I'll take some pics as well. I'm not intending on taking the old one off yet as my car is stored for the winter right now. Today it's blowing snow & -8 and I ain't about to open the garage door. Stay tuned.
Rambit
Thanks Rambit but to see the duct's you have to take the front belly pan off.
So when you get to it that will be fine. In the mean time I will be checking around . I was hoping to get them on before we leave for the SF.
__________________
Stock 300 rwhp 352 rwt
Front & Rear SRT Fascia,Hotchkis Sway Bars,BT catch can,power steering cover,and others, Clear side markers.Leather console cover from 22 Elite and Racing peddles, 180 MotoRad stat,custom Engine cover with pin-striping,Corsa Cat Back,K&N Drop in filter,Diablo 91 Tune.
Thanks Rambit but to see the duct's you have to take the front belly pan off.
So when you get to it that will be fine. In the mean time I will be checking around . I was hoping to get them on before we leave for the SF.
I have your answer moddog without having to remove my old one to compare.
This pic is what you'd see if looking into the wheelwell, just like the one JMatt posted. It's a little hard slipping the camera in with the wheel cranked and it's out of focus.
This pic is the new shield, viewing it as if from the wheelwell. I didn't notice that it's up side down, but you can get an idea:
Basically what you're looking at is the flanged edge as you would see it. In other words, there are no other parts involved. It's secured by plastic fasteners at the duct opening.
The question remains now is if the 300C wheelwell is notched to accomodate the duct like the SRT8 is. If it's not, you'll need the SRT8 wheelwell is my guess. Have a look at yours.
Rambit
__________________ 2009 calendars are ready! Check it out --->HERE
2005 300C SRT8 - #72 of 252 (excl. 11 pilots) - #10 of 35 Canadian SRT8's built 2008 Harley Davidson FLSTF Fatboy - Vance & Hines Big Shots STGD with FuelPak tune. 2008 Jeep GC SRT8 - Custom Build/Custom Delivered by SRT - 1 of 1 in Canada
Sorry. I thought I was previewing the post above, but accidently posted it before I was finished. I also noticed how bad the salt is on my tonneau cover...haha.
Rambit
__________________ 2009 calendars are ready! Check it out --->HERE
2005 300C SRT8 - #72 of 252 (excl. 11 pilots) - #10 of 35 Canadian SRT8's built 2008 Harley Davidson FLSTF Fatboy - Vance & Hines Big Shots STGD with FuelPak tune. 2008 Jeep GC SRT8 - Custom Build/Custom Delivered by SRT - 1 of 1 in Canada
I have your answer moddog without having to remove my old one to compare.
This pic is what you'd see if looking into the wheelwell, just like the one JMatt posted. It's a little hard slipping the camera in with the wheel cranked and it's out of focus.
This pic is the new shield, viewing it as if from the wheelwell. I didn't notice that it's up side down, but you can get an idea:
Basically what you're looking at is the flanged edge as you would see it. In other words, there are no other parts involved. It's secured by plastic fasteners at the duct opening.
The question remains now is if the 300C wheelwell is notched to accomodate the duct like the SRT8 is. If it's not, you'll need the SRT8 wheelwell is my guess. Have a look at yours.
Rambit
Rambit if you look at the right side front of the fascia you will another peace. There is a hole in it about 1 1/4" in diameter and the one on the drivers side has none. Look at these photo's and you will see what I am talking about. You can see the hole in the second & third photo.
__________________
Stock 300 rwhp 352 rwt
Front & Rear SRT Fascia,Hotchkis Sway Bars,BT catch can,power steering cover,and others, Clear side markers.Leather console cover from 22 Elite and Racing peddles, 180 MotoRad stat,custom Engine cover with pin-striping,Corsa Cat Back,K&N Drop in filter,Diablo 91 Tune.
Linear Mode
