Anyone install their own lowering springs?

300C2NV · 06-23-2006, 07:28 AM

Hey guys, just looking to see if this is a job I want to try and tackle and save $180 in labor. Thanks!

magnumfreak · 06-23-2006, 08:00 AM

There is a good write up over at lxforums in the knowledgebase that shows a ton of pics and a step by step. Check it out and decide. I did my own and I am not that mechanically inclined. I would encourage you to have someone else with you to help. It will go much faster.

beyondcomp · 06-23-2006, 08:45 AM

Yeah def have help with this, its not that hard but you need to be veryyyyyyyyy careful when compressing the springs, if they pop out they can easily take a head off

bskylerj · 07-01-2006, 12:52 AM

I did mine today. It took me and a buddy almost 6 hours. If I was to do it all over I would pay the labor.

Interested in the Dodge Challenger? Be sure to check out the Dodge Challenger Forum for your Dodge Challenger information!