UAS ride height psi

[Flossin22s]

hey just got done on my install...........damn that sh*t is fun, i was hella trigger happy, especially when those honeys were jocking............but how much pressure u guys riding around with, i was at 80 but was a bit too low for me and was tuckn some tire at that......does any one what the most these badboys can handle, i had it at 120 for a while but didnt know if it was too much..........i'll post picks tomorrow

[jdiddy101]

Congrats Flossin get those pics up.

[NotYet]

Got no idea on the right PSI...but there is one thing I know about...PICS!!!

WHERE ARE YOUR PICS?!?!?!?!

Congrats on the DIY!!

[UniversalAirSuspension]

Pressure changes some between the models & tire size. I usually will suggest between 1-2" over the top of the tire if you have like a 22x9.5" wheel. Main thing is that you dont want to catch the lip of the fender when your turning.

[Flossin22s]

cool, thanx

[williamspeaking]

i cruise 100-120 in the fronts and usually like 80-90 in the rears. On a smooth street or in a parking lot i can drop the back to like 60psi.

[PappaD]

You guys are making me crazy!! I had to go stare at my UAS kit sitting in the closet!! Next week I'll be serving up PANCAKES!!!

[LAYN300]

120 in the front 0 in the rear with a trail of sparks flowing behind

[4u2nv]

80% of the time I cruise exactly like William does. About 120 in the front and 80 in the back. Because of the engine, you want more pressure in the front then in the back to make it even. 10% of the time, (when I have my nitrogen tank filled) I ride at 200psi in all four corners for that stupid 4X look just so I can sssssllllllloooowwwwlllllyyyyy drop it down to clown. And the other 10% (when I'm feeling like a real cocky A-Hole) I have the front maxed up and the back all the way down, but enough pressure to just pick it up enough not to bounce. That's the minitrucker coming out of me though.