Help With Lowering

[300C-hris]

Has any 1 heard of dropzone springs??


Chrysler 300 300C 2005-2007 Dropzone Lowering Springs-Chrysler Lowering Springs

[Jaxon]

Originally Posted by rawrods

Im only going to cut the rear. My front sits pretty good but I cant stand the back. My fender gap on the rear is 4 1/2in and the front is 2 3/8. So Im just going to cut the rear to see if it looks better and how it rides.

Before you cut the springs try removing the rubber isolators. I got almost an inch more drop. Here's a pic of mine with the prokit and no isolators on the rear and only the top isolator on the front.

[GROUNDED]

there cheap poop thats bout it.

Originally Posted by 300C-hris

Has any 1 heard of dropzone springs??


Chrysler 300 300C 2005-2007 Dropzone Lowering Springs-Chrysler Lowering Springs

[Flossin22s]

Originally Posted by Jaxon

Before you cut the springs try removing the rubber isolators. I got almost an inch more drop. Here's a pic of mine with the prokit and no isolators on the rear and only the top isolator on the front.

so ur springs are metal to metal??

[Flossin22s]

sorry for the delay but heres the pics

sportlines with 255 30 22
i really suggest you do it this way looks good and the gap is perfect IMO to not worry about the fenders catching.
rides real good too

[b]


sh*ty cam with flash but shows the gap

[Flossin22s]

I'll get better pics, sun is down already

[rawrods]

Thats looks really nice. I would say by the time its over with Ill be putting the pro-kit in.

[300C-hris]

How does it ride?

[rawrods]

Yea how does it ride?????

[Flossin22s]

rides pretty good.......i think eibach are the best for drops...