Corner Weighing

[dms]

I am doing some research for a paper I am writing. Has anyone actually performed a corner weighing and adjusting on a LX, and if so, what was the actual outcome?

What was the bias front to rear and side to side

thanks
mike
dms

[GoofyTimL]

Not sure what you're asking... is it weight on each wheel? and then total front to back?

Not that I have any info on either, but just for clarity of those who may.

[bruno]

I hope you can find the answer you need so you won't have to figure it out yourself. After reading this attached article, I'll leave it to the experts, lol!

Good luck!
bruno

http://www.articlecity.com/articles/auto_and_trucks/article_1601.shtml

[dms]

Corner Weighing and all the variable, is not for the light harded to say the least. The object is to basically have a 50/50 weight distribution when accelerating thru a corner. Doing so will require you to set up more weight to the front in a static position, because when accelerating, weight is transferred to the rear. Therefore you need to have more bias to the front when corner weighing in a static positiion.

It is a concept that is being done by lots of race cars and performance street cars that will track or autocross their rides.

Just taking it to the next level

mike
dms