I Need Help !

GuiltyJay153 · 04-09-2009, 11:22 AM

I purchased 22" rims and Front & Back Spacers to get that bulky Look " Rims stick out from Fenders" for my 06 Chrysler 300C Hemi. They look Hot, But every time I hit a bump my fenders eat my tires. I want to lift my 300C. Is there anything that I can purchase to Lift it? Please point me in the right direction. I really like the bulkyness and wish not to remove the spacers. What are my options ? Hope to hear from you soon... Thank You

Bailman · 04-09-2009, 11:47 AM

Welcome to the forum.

Need More information.

What is the rim width?
What tire sizes do you currently have?
What type of spacers are on?

Perhaps a fender roll would be your best option.
If you do a search you will see what I mean.

GuiltyJay153 · 04-09-2009, 12:38 PM

I don't know what the width is . They are 22" Rims. I got the low profiles and the spacers are the 2" spacers that go inside the rims to make the rims stick out from the fenders. Sorry I don't know the specs. I purchased them from Ebay.

**GoofyTimL** · 04-09-2009, 01:09 PM

WELCOME from our West Virginia LXs in the Mid-Ohio River Valley! Please consider introducing yourself in the New Members forum so that more folks will recognize your presence here.

If you look on the sidewall of the tire what are the numbers... xxx/xx/22. That will help for starters. You probably can estimate your rim width by feel and a tape measure.

GROUNDED · 04-10-2009, 12:05 PM

Quote:

Originally Posted by GuiltyJay153

I don't know what the width is . They are 22" Rims. I got the low profiles and the spacers are the 2" spacers that go inside the rims to make the rims stick out from the fenders. Sorry I don't know the specs. I purchased them from Ebay.

There is nothing you can you can do. There are no lift kits made and lifting both front and rear via custom spacers would be ghetto as hell. The 2" spacers are already sketchy as I can't tell you how many times ive seen them snap off and rip the fender off with it. As much as you like it its really unsafe. Personally I would pull the spacers off and mount your wheels like there supposed to be mounted.

3733H · 04-10-2009, 02:15 PM

2"! Your wheels must stick out quite a bit then. Got any pics?

Interested in the Dodge Challenger? Be sure to check out the Dodge Challenger Forum for your Dodge Challenger information!