|
Tie Rod Help
Hey guys, I was in the process of changing my outer tie rod and was having a hard time loosening the Jam nut (nut connecting outer tie rod to inner tie rod). Im basically following the procedure outlined in the service manual. Does anyone have any suggestions on loosening it up? Would it matter if I removed the tie rod end bolt first and then dealt with the jam nut? Any help would be greatly appreciated.
__________________
Stainless Steel Mesh Grill [X]
SRT8 spoiler [X]
Lower bumper mesh [X]
Clock Mod [X]
Painted to match Engine Cover [X]
Pedders suspension parts [X]
AAC Halos 6000K - to be installed, unless sold 
|
Linear Mode
