INDY Cylinder Heads, Kooks Long Tube Headers and B&G Tuning Packages!

[tbyrne]

We've updated the Mopar Power Package section of our website and added a bunch of new packages to save you money! Another package to greatly increase your vehicle's performance and keep extra money in your walllet is the INDY Cylinder Heads combined with a set of Kooks long tube headers. You have to take the manifolds off for the head swap so that is a good time to bolt on some long tubes. This package is completed with a B&G flash.

5.7 Maxx Head kit includes:
Fully CNC ported 5.7 castings, 2.00x1.55 valves (327cfm), priority valve job, titanium retainers, Viton seals, heat insulator intake gaskets, Manley polished bee hive springs, 5/16 chrome moly push rods, fully assembled.
BG57-1 B&G Hemi Passenger Car Flash

This PCM upgrade is designed for stock vehicles or vehicles with some modifications (mild cam, cold air, headers)

05/06 Hemi 300/300C/ Magnum/Magnum R/T/Charger/Charger Daytona Premium fuel & (MBT) timing curves, 750 idle, 6500 rev, 140 mph, cooler fan on temp

5.7 Package price $2139.99

Add a Kooks Long Tube Header Package to the above!

Equal length tube on all primary's
1 3/4" diameter primary tubes for the 5.7
3" fire cone collectors
Custom 3" mid pipes with Ultra Hi Flow Metallic cats
Full Color instructions and all hardware and gaskets included
6910-CC Kooks 1 3/4" x 3" w/ 3" Metallic Catted Connection w/ O2 Extension Kit (2-18" & 2-6")

5.7 Package price $3175.00 ($684.97 savings!).
Price does include any cores.

6.1 Maxx Head kit includes:
Fully CNC ported 6.1 castings, 2.08x1.60 valves (370cfm), priority valve job, titanium retainers, Viton seals, heat insulator intake gaskets, Manley polished bee hive springs, 5/16 chrome moly push rods, fully assembled.

B&G SRT 8 2005/2006 SRT-8 Flash

Stage II
Revised premium 91-93 oct fuel (MBT) timing & WOT fuel tables
Rev limit raised to 6450 or 6800
Idle speed raised to 750
Firmer Shifts
Modified torque management

6.1 Package price $2299.99

Add a Kooks Long Tube Header Package to the above!
Equal length tube on all primary's
1 7/8" diameter primary tubes
3" fire cone collectors
Custom 3" mid pipes with Ultra Hi Flow Metallic cats
Full Color instructions and all hardware and gaskets included
6905-CC Kooks 300C/Magnum/Charger 1 7/8" x 3" Stainless Steel Headers w/ 3" Metallic Catted Connection w/ O2 Extension Kit (2-18" and 2-6")

6.1 Package price $3449.99
You can add the ported intake manifold to this for a total of $4149.97!

*Core charges note included in the price above

Orders can be placed online or by giving us a call at 1-877-482-9763. More info can be seen on our website.

Have a great day!

[tbyrne]

Bump

.....

[tbyrne]

[HEMI4ME?]

I have a question...

I am only considering these mods, and I am not 100 percent there yet. I was thinking these prices look great, but I didnt notice any cam solution?

I also am not sure I want to add extra money for the BG in hopes that the Predator does what we think it will.

SO that being said, I will post these questions...

Ok, so I know for a fact I cannot do HEADS, CAM, HEADERS, LABOR... Its just not in the budget right now (UNLESS THE DEAL IS AMAZING )

I have a CSRT8 with Magnaflow Highflow cats, GSM spacers, Airaid Intake, 185 Tstat, Diablo ordered. I removed the Magnaflow exhaust this week because the sound was getting to me. It was just too loud in the cabin.

Which of these 2 would make the best sense, or and make the most power?

1. Heads and cam

2. Headers and cam

And conversely if I could only do one... Which should I consider first?

A. CAM

B. Headers

Any help, or input would be appreciated, I am a car novice, I know very little which is to say only what I read here on the Forum!

Thank you!

Paul

[tbyrne]

We have some head/cam packages listed here - INDY Cylinder Heads/Comp Cam Package - $2049.99!

A heads/cam package will provide more of a gain than doing the headers/cam. If your going to look at headers or a cam and only do one of them, you can see more power from the cam depending on how aggressive it is. Headers is an easier install though. Let me know if you need any other info.

Thanks!