egr help - Chrysler 300C Forum: 300C & SRT8 Forums
UK & Europe Regional Forum This section is for topics relating to the EU versions of the Chrysler 300 and diesel powered models.

 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 11-11-2012, 08:57 AM Thread Starter
Senior Contributing Member
Points: 17,223, Level: 1 Points: 17,223, Level: 1 Points: 17,223, Level: 1
Level up: 99% Level up: 99% Level up: 99%
Activity: 0% Activity: 0% Activity: 0%
 
alex uk's Avatar
 
Join Date: Oct 2012
Location: cardiff s wales uk
Posts: 545
Thanks: 1
Thanked 11 Times in 11 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
egr help

Hi everyone I want to blank my Egr
But I can't find it can anyone help
Also will my 2.7k resistor work with the swirl motor??
alex uk is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 11-11-2012, 10:23 AM
Supporting Vendor
Points: 97,683, Level: 1 Points: 97,683, Level: 1 Points: 97,683, Level: 1
Level up: 99% Level up: 99% Level up: 99%
Activity: 30% Activity: 30% Activity: 30%
 
paul@thecustom300cshop's Avatar
 
Join Date: Nov 2006
Location: Wales Uk
Posts: 4,701
Thanks: 27
Thanked 219 Times in 209 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
its are the rear of the right hand bank, the would need the get a remap to delete the egr, or the light on the dash will stay on,

Resistor in the swirl will work



www.custom300cshop.co.uk

Clear marker - Startech grill - Rear Rosen twin screens - Lockpick v2 - Front camera & Rear Camera - Chrome Pillars - BMC filter - 20'' SRT8 wheel with Brembo brakes - Billet tech catch can - Billet Tech centre caps- Billet Tech emblems - Billet tech - a/c controls, extra large intercooler, 312bhp 537ft.lbs DIESEL ( dyno proven ) Cobra rear pipes, Tranzformer

http://www.facebook.com/pages/The-Cu...620497?fref=ts

Last edited by paul@thecustom300cshop; 11-11-2012 at 10:23 AM.
paul@thecustom300cshop is online now  
post #3 of 8 (permalink) Old 11-11-2012, 12:04 PM Thread Starter
Senior Contributing Member
Points: 17,223, Level: 1 Points: 17,223, Level: 1 Points: 17,223, Level: 1
Level up: 99% Level up: 99% Level up: 99%
Activity: 0% Activity: 0% Activity: 0%
 
alex uk's Avatar
 
Join Date: Oct 2012
Location: cardiff s wales uk
Posts: 545
Thanks: 1
Thanked 11 Times in 11 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
I was told I could put a resistor in the Egr plug and. What will I gain g on removing the swirl and Egr?

Sent from my GT-N7000 using AutoGuide.Com Free App
alex uk is offline  
post #4 of 8 (permalink) Old 11-11-2012, 12:05 PM Thread Starter
Senior Contributing Member
Points: 17,223, Level: 1 Points: 17,223, Level: 1 Points: 17,223, Level: 1
Level up: 99% Level up: 99% Level up: 99%
Activity: 0% Activity: 0% Activity: 0%
 
alex uk's Avatar
 
Join Date: Oct 2012
Location: cardiff s wales uk
Posts: 545
Thanks: 1
Thanked 11 Times in 11 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
What foes the Egr look like

Sent from my GT-N7000 using AutoGuide.Com Free App
alex uk is offline  
post #5 of 8 (permalink) Old 11-11-2012, 01:42 PM
Supporting Vendor
Points: 97,683, Level: 1 Points: 97,683, Level: 1 Points: 97,683, Level: 1
Level up: 99% Level up: 99% Level up: 99%
Activity: 30% Activity: 30% Activity: 30%
 
paul@thecustom300cshop's Avatar
 
Join Date: Nov 2006
Location: Wales Uk
Posts: 4,701
Thanks: 27
Thanked 219 Times in 209 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
you can put a resistor on the egr, but the check light will stay on, no one has found away around that, without the delete in the mapping

Last edited by paul@thecustom300cshop; 11-11-2012 at 01:43 PM.
paul@thecustom300cshop is online now  
post #6 of 8 (permalink) Old 11-12-2012, 08:19 AM
Elite Contributing Member
Points: 21,035, Level: 1 Points: 21,035, Level: 1 Points: 21,035, Level: 1
Level up: 99% Level up: 99% Level up: 99%
Activity: 58% Activity: 58% Activity: 58%
 
Join Date: Aug 2010
Location: Doncaster
Posts: 2,685
Thanks: 188
Thanked 355 Times in 339 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Will run much, much better with resistor in place of EGR , but as stated above mil light will come on after about 5 trips.
I reset code every five or so trips its not too much trouble to me, but I don't like running with light permanently on and poss. hiding other problems.

Jack
jackwalton is offline  
post #7 of 8 (permalink) Old 11-12-2012, 05:06 PM Thread Starter
Senior Contributing Member
Points: 17,223, Level: 1 Points: 17,223, Level: 1 Points: 17,223, Level: 1
Level up: 99% Level up: 99% Level up: 99%
Activity: 0% Activity: 0% Activity: 0%
 
alex uk's Avatar
 
Join Date: Oct 2012
Location: cardiff s wales uk
Posts: 545
Thanks: 1
Thanked 11 Times in 11 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
I got the tps light on so another light wont bother me for now
alex uk is offline  
post #8 of 8 (permalink) Old 11-13-2012, 03:49 AM
Elite Contributing Member
Points: 21,035, Level: 1 Points: 21,035, Level: 1 Points: 21,035, Level: 1
Level up: 99% Level up: 99% Level up: 99%
Activity: 58% Activity: 58% Activity: 58%
 
Join Date: Aug 2010
Location: Doncaster
Posts: 2,685
Thanks: 188
Thanked 355 Times in 339 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Quote:
Originally Posted by alex uk View Post
I got the tps light on so another light wont bother me for now
Yes but TPS light is insignificant compared to MIL.
Personally I wouldn't want to run with MIL light on, but TPS wouldn't bother me a bit.
If you don,t have a reader that will clear MIL lights I would buy one for the sake of 25'ish and read the codes and clear the light on a regular basis.


P0401 is a regular error code that comes up when EGR is prevented from working which is "EGR insufficient flow". This obviously comes up because the EGR is prevented from working cos its unplugged and a pressure sensor detects that valve hasn't opened.

Jack
jackwalton is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Chrysler 300C Forum: 300C & SRT8 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
Inactive Reminders By Icora Web Design