24×10

[DUB EDITION]

With 300C RWD can i go 24×10 in front ?

[highrexpctations]

i am but modified spindles and custom made control arms though

[Topmotorsports]

Yes you can. Need at least 10-13 offset.

[DUBSTER]

Also have to roll the fenders.

[ATL300c]

I just got my 24x9 installed the other day. I am going to make a thread shortly with everyones answers to tire size questions rims and offsets b/c I went through the exact same thing.

[srt8danno]

Originally Posted by ATL300c

I just got my 24x9 installed the other day. I am going to make a thread shortly with everyones answers to tire size questions rims and offsets b/c I went through the exact same thing.

That would be very helpful as we are having more and more members wanting to do something like this. I would store it in my files for future use if you did. Thanks! Good luck!

[300CN24S]

I'm running 24x10 all around. I didn't have to roll the fenders. You'll are going to like the look with 24's.

[DUBSTER]

Originally Posted by ATL300c

I just got my 24x9 installed the other day. I am going to make a thread shortly with everyones answers to tire size questions rims and offsets b/c I went through the exact same thing.

SEWEEEEEEEET !!!! Looking forward to seeing pics as well!!!

[cnote05300]

There are a couple members running 24x10s around the forum.. so yes it can be done, just watch your offset.

[YoungMedic23]

Originally Posted by Topmotorsports

Yes you can. Need at least 10-13 offset.

This here is my go-to-guy. My rims are 24x10 and they're on no rub whatsoever..........with a little modding!