22x11 rears

[DMC]

whose is running 22x11 rears and did you have to roll your fenders?

[smoove7410]

Hemmissy is and you will.

[DMC]

someone else chim in

[Rambit]

There's a thread by XCITsNU (Jeremy) from way back who widened his stock wheels to 10.8". I couldn't find any other threads how it turned out, so I don't think he ever reported back.

You can have a look at this thread though http://www.300cforums.com/forums/srt...more-meat.html. He did say in his first post that even with rolling the fenders it wouldn't work with 11".

[jjdear13]

i beleive williamspeaking is running 13s in the rear. correct me if im wrong

[HEMMISSEY]

Originally Posted by smoove7410

Hemmissy is and you will.

YUP

if you plan on lowering, then YES you would have to. At full lock up (fully aired up-UAS vocabulary) It didn't rub, but when lowered to desired ride height and people in the back......
RuBaDuBdUb.....
now with it rolled, i can tuck wheels and skiiiiiiiiiiiiiiiiiirt.....

[DMC]

chip on here with the white 300 touring said he had 22x11 asanti af-128 and he did not roll his fenders. Is the suspension that much of a difference bewteen my car the limited v-6 and the hemi model? wheels already have been ordered don't mind rolling the fenders if i have to just don't know how. by the way my car is lowered 1.6 " with the sportkit right now.

[36 chambers]

22X 10.5 HERE GOT ROOM FOR WIDER WHEEL AND MEATIER TIRES..RUNNING KWS SO NO WORRIES ON THE RUBBING!!

[smoove7410]

Originally Posted by DMC

chip on here with the white 300 touring said he had 22x11 asanti af-128 and he did not roll his fenders. Is the suspension that much of a difference bewteen my car the limited v-6 and the hemi model? wheels already have been ordered don't mind rolling the fenders if i have to just don't know how. by the way my car is lowered 1.6 " with the sportkit right now.

ECHOE, ECHOE, ECHOE...yes, you will have to roll your fenders. Very few here are running 11's, only 10.5's. Chip's car was not lowered, and he was running the same tires size all around.

[DMC]

he was lowered 2" thats what he said. anyways how difficult is it to roll the fenders?