Zoomers dual Exhaust for V6 3.5L

[aperformance]

Hey 300 members, The first V6 3.5L test car was just completed and it sounds awesome. DJ just left our shop a happy camper, look for his review and pics. later tonight.. Also "Ink" another So Cal local member stopped by to check it out and bought his on the spot. It's essentually the same as the 300C system except for the tips and a few extra parts needed to complete the system. The Sawed-off tips are the same design just shorter in length 7" compared to the Cannon tip 12" used on the 300C. I chose the shorter tips to get more sound out of the V6 and boy did it work...Still NO Drone or Cabin Resonance. The Mopar Parts needed are 2- 4581723 Bracket exhaust, 2- 4581790 Isolator Exhaust suspenders and 1- 4780894 Silencer Tunnel...In a nut shell 2 exhaust hangers and a heat shield for the drivers side under the gas tank. Oh yeah, I almost forgot 1- 2-1/4" stainless X-pipe. I used a Magnaflow it fits real nice in place of the stock y-pipe. Check out Dj's post later and see the before and after pic's. It does take a little handy work for the D.I.Y. crowd. Things like welding and some fab work as well as cut out's in the rear bumber. Right now I would like to gauge the interest in a true dual system for the 3.5L so if any So Cal locals like Ink want some duals we can do it in our shop right away. If the demand is there I think we can built it as a true bolt on. Gimmie some feed back members. Thanks, Ron

[Mr.DJ]

Originally Posted by aperformance

Hey 300 members, The first V6 3.5L test car was just completed and it sounds awesome. DJ just left our shop a happy camper, look for his review and pics. later tonight.. Also "Ink" another So Cal local member stopped by to check it out and bought his on the spot. It's essentually the same as the 300C system except for the tips and a few extra parts needed to complete the system. The Sawed-off tips are the same design just shorter in length 7" compared to the Cannon tip 12" used on the 300C. I chose the shorter tips to get more sound out of the V6 and boy did it work...Still NO Drone or Cabin Resonance. The Mopar Parts needed are 2- 4581723 Bracket exhaust, 2- 4581790 Isolator Exhaust suspenders and 1- 4780894 Silencer Tunnel...In a nut shell 2 exhaust hangers and a heat shield for the drivers side under the gas tank. Oh yeah, I almost forgot 1- 2-1/4" stainless X-pipe. I used a Magnaflow it fits real nice in place of the stock y-pipe. Check out Dj's post later and see the before and after pic's. It does take a little handy work for the D.I.Y. crowd. Things like welding and some fab work as well as cut out's in the rear bumber. Right now I would like to gauge the interest in a true dual system for the 3.5L so if any So Cal locals like Ink want some duals we can do it in our shop right away. If the demand is there I think we can built it as a true bolt on. Gimmie some feed back members. Thanks, Ron

Hello Ron,

My photos and review have now been posted:

Zoomers Dual Exhaust for 3.5L V6

[aperformance]

More photos and sound bites coming for you V6 owners. We have two custom installs this week "Ink" and I should be able to get some video and sound up by Friday, if everything go's to plan...DarrenPH1 your on for Saturday. Stay tuned

[six7one]

I just got my Zommers installed today and all I can say is ZOM ZOM BABY!!!!!!
Frank & his brother Ron are the greatest!!!!!! very nice people. I just went down to the shop to see the exhaust set up and Frank & Ron was very nice to take the time to explain the hole product and install to me and I was very impressed with product, I had it installed right then and there, they installed X-pipe, dual mufflers and 12" silencer tips and I have the tips tucked right under the rear axel, I will be posting pic. soon. Once again Frank & Ron my hats off to you and your staff....

THANK YOU, John aka six7one

[aperformance]

Originally Posted by six7one

I just got my Zommers installed today and all I can say is ZOM ZOM BABY!!!!!!
Frank & his brother Ron are the greatest!!!!!! very nice people. I just went down to the shop to see the exhaust set up and Frank & Ron was very nice to take the time to explain the hole product and install to me and I was very impressed with product, I had it installed right then and there, they installed X-pipe, dual mufflers and 12" silencer tips and I have the tips tucked right under the rear axel, I will be posting pic. soon. Once again Frank & Ron my hats off to you and your staff....

THANK YOU, John aka six7one

Thanks, Glad you like your system. The duals on the V6 sound great, for those of you that haven't heard them yet check out this thread.

Zoomers Dual Exhaust for 3.5L V6

P.S. It's Zoomers not Zommers. Zoom Zoom.... I think Mazda has already coined that phrase. Thanks again John, Ron

[Mr.DJ]

After nearly six months of excellent service, my 'Zoomers' custom dual exhaust system has developed an even more aggressive (deeper) growl.

[rrdrummer5]

do you know if this will fit on the magnums? im in socal, could you give me the info of the shop you went to? thanx!

[aperformance]

Originally Posted by rrdrummer5

do you know if this will fit on the magnums? im in socal, could you give me the info of the shop you went to? thanx!

Yes, they fit the Magnums, we have the duals and a single cat back for your car. Zoomers is in Irvine, CA give us a call...949-916-3240 Ron


Single Video: http://www.zoomersexhaust.com/magnumSXT/default.htm

Dual Video: http://www.zoomersexhaust.com/300/default.htm


We did the first custom set of duals on MR.DJ's 300, and the rest is history..