Chrysler 300C & SRT8 Forums banner

Recent content by bm_srt

  1. 2006 Chrysler 300c wont start, please help!

    General Discussion
    How old is the battery? That is statistically the most likely scenario. My last battery died at only three years without warning whereas the one before lasted twice as long and was causing issues. Also check your battery ground cable, they can cause all kinds of odd issues if not fully...
  2. SRT8 AMG brake conversion?

    1st Gen SRT8-Specific General Discussion
    Looks good and thank you for the detail. 6 piston on the rear sounds very unique, which calipers are you using? Sent from my SM-G950U using Tapatalk
  3. Question on exhaust tips

    1st Gen SRT8-Specific Performance & Engine/Intake/
    Nothing special, just a template, cut off wheel, 2" sanding drums and sandpaper to finish it off. I then added a locking edge trim to finish the edges. Sent from my SM-G950U using Tapatalk
  4. My 300s build🤙

    300 Eye Candy
    I love the white and chrome. Are the oem headlamps the HID version? If so, do you still have them? Sent from my SM-G950U using Tapatalk
  5. SRT8 AMG brake conversion?

    1st Gen SRT8-Specific General Discussion
    That looks incredible! I'm curious to see how you mounted the calipers and fit the AMG rotors as well on the 5.7 spindles. I've got the 8 pistons with the 390mm SRT rotors. Below is a link to my thread on how I fit them to the srt spindles...
  6. Question on exhaust tips

    1st Gen SRT8-Specific Performance & Engine/Intake/
    I sent in a pair to Weldcraft located in Livonia, Michigan. While on this topic, I changed up the tips again to Mopar square tips. Sent from my SM-G950U using Tapatalk
  7. I'm Back With A New 2019 300 SRT8 And A Lot Has Changed!

    General Discussion
    Yeah they are good, just curious since the US Charger and Challenger Srt models have had the 6 pistons since 2015. The biggest complaint has been the oem rotor price but I finally found some aftermarket offerings for a lot cheaper. I did the swap with 8 piston AMG calipers and the 390mm mopar...
  8. I'm Back With A New 2019 300 SRT8 And A Lot Has Changed!

    General Discussion
    Nice, are they equpped with the 6 piston/15.4"/390mm front brakes yet or are they still using the 4 pistons/360mm combo? Sent from my SM-G950U using Tapatalk
  9. what did you do to your 300 today?

    General Discussion
    Washed it and went back to a chrome grill: Sent from my SM-G950U using Tapatalk
  10. 270-40 R20 / 275-40 R20 ! anyone? photos?

    Performance Wheels & Tires
    Pop some traditional lowering springs in there and you will be much happier. I went with 2009 Charger SRT springs up front for stiffness and a height that will clear curbs and a mild Pedders lowering spring in the rear. Sent from my SM-G950U using Tapatalk
  11. Headlights going off and on

    1st Gen SRT8-Specific General Discussion
    What brand of headlight bulbs are installed currently? I had that issue when I used aftermarket bulbs and it went away after switching back to an oem manufacturer such as Sylvania/Osram or Philips. Sent from my SM-G950U using Tapatalk
  12. Engine upgrade suggestions

    1st Gen SRT8-Specific General Discussion
    Did you adjust the tune? I had that issue with my startup tune but a quick log and email emap fixed it. Sent from my SM-G950U using Tapatalk
  13. Why Is MY 300S Much faster Than My 300C?

    2nd Generation Chrysler 300 Discussion
    Torque to the ground equals the engine output times the transmission gear ratio times the rear end ratio. If you play with the last two variables, then you can increase the torque output without touching the engine. Compared to the 5 speed Nag1, the 8 speed has higher ratios in the lower gears...
  14. Correct oil weight for Getrag Differential?

    1st Gen SRT8-Specific General Discussion
    Its 75w-90. I use Royal Purple which has the friction modifier in it already, no need to add more. Sent from my SM-G950U using Tapatalk
  15. Android Car Stereo?

    Car Audio/Alarms/UConnect/Navigation
    Sorry to hear that. That looks like the same one I have in my 2006 Srt and I had the complete opposite experience. Mine has been fantastic aside from a few setup glitches such as switching some wires and drilling out the small hole for the clock adjustment button. There is a reset button on...
Top