Search results

Its just like any wheel, perfectly normal. I just installed some Michelin Pilot Sport 4S in 305/35/20 on them. The ride is perfect and the traction is unlike any other tire I have tried.

Yes the link works but it's from the UK. The new pads I put are working great so far. Sent from my SM-G950U using Tapatalk

I use Pandora and Youtube for music. I had the Amazon Music app but I had issues with it logging me out each time I closed the app. I am using the preinstalled app for bluetooth, I would be interested in other bluetooth apps if they have any additional features. Sent from my SM-G950U using...

Where do buy the backing pads from? Online I only see them from foreign ebay sources, are they not used in the US? Do you place them under or on top of the shim? There isn't much room there to begin with in the caliper to increase the thickness of the pad. I installed some Centric Posi-Quiet...

Can't wait to see that setup! What pads are you using up front? Sent from my SM-G950U using Tapatalk

How old is the battery? That is statistically the most likely scenario. My last battery died at only three years without warning whereas the one before lasted twice as long and was causing issues. Also check your battery ground cable, they can cause all kinds of odd issues if not fully...

Looks good and thank you for the detail. 6 piston on the rear sounds very unique, which calipers are you using? Sent from my SM-G950U using Tapatalk

Nothing special, just a template, cut off wheel, 2" sanding drums and sandpaper to finish it off. I then added a locking edge trim to finish the edges. Sent from my SM-G950U using Tapatalk

I love the white and chrome. Are the oem headlamps the HID version? If so, do you still have them? Sent from my SM-G950U using Tapatalk

That looks incredible! I'm curious to see how you mounted the calipers and fit the AMG rotors as well on the 5.7 spindles. I've got the 8 pistons with the 390mm SRT rotors. Below is a link to my thread on how I fit them to the srt spindles...

I sent in a pair to Weldcraft located in Livonia, Michigan. While on this topic, I changed up the tips again to Mopar square tips. Sent from my SM-G950U using Tapatalk

Nice, are they equpped with the 6 piston/15.4"/390mm front brakes yet or are they still using the 4 pistons/360mm combo? Sent from my SM-G950U using Tapatalk

Washed it and went back to a chrome grill: Sent from my SM-G950U using Tapatalk

What brand of headlight bulbs are installed currently? I had that issue when I used aftermarket bulbs and it went away after switching back to an oem manufacturer such as Sylvania/Osram or Philips. Sent from my SM-G950U using Tapatalk

Check or replace the oxygen sensors. My 2006 300srt is at around 14.5 mpg with a heads/cam setup, 3.91 rear end, 315/35 rear tires and 155,000 miles. It used to be at 17-18 mpg stock so I would imagine a 5.7 would fare a bit better. Sent from my SM-G950U using Tapatalk

Did you adjust the tune? I had that issue with my startup tune but a quick log and email emap fixed it. Sent from my SM-G950U using Tapatalk

Torque to the ground equals the engine output times the transmission gear ratio times the rear end ratio. If you play with the last two variables, then you can increase the torque output without touching the engine. Compared to the 5 speed Nag1, the 8 speed has higher ratios in the lower gears...

I did a few mostly functional things, with the goal of keeping it somewhat factory looking. I widened the rear wheels and added Michelin PS4 tires to match. I cut the bumper a bit and added 4.5" quad exhaust tips. I added an 8 piston brake caliper with a 15.4" hellcat rotor: I went...

The offset is lower than stock so you do not need a spacer. The wheel will stick out about a 1/4" further than the OEM wheel. Sent from my SM-G950U using Tapatalk

Stick with an equal length design for the true gains that come with long tubes. I went with Kooks and they are fantastic. Typically the mid pipe is specific to the header and is sold in a kit with the headers. A custom tune will help, especially to turn off the rear o2 sensors to avoid a...