Hey guys, I'm a new member here but have bbeen reading posts for about a year now. I have a 2005 Chrysler 300c. I just finished installing my spartan plus camshaft, obx long tube headers, non MDS lifters, upgraded springs/pushrods, new gaskets all around. I did the work myself, and when finished...

Gen 3 Hemi 5.7l lube design fail?

I have a 2006 300C SRT8 157,000 miles Mostly stock: Cold air intake, throttle body replaced, gas tank replacement for stall on fill-up issue The car is generally running pretty well, but above 3,000RPM the engine begins to stutter aggressively and won't accelerate until I release the...

I have a 2012 Chrysler 300 SRT 8, 70,000 miles. About a year ago the CEL came on. Codes were for bank 2 position 1 and bank 2 position 2 O2 sensor. Replaced upstream sensor first. 6 weeks, or 2 months later CEL came back on. Bank 2 position 2 O2 sensor. Replaced downstream sensor. Problem fixed...

engine noise. spun bearing? Hey guys, i have the 2008 2.7L 300LX. I got my oil changed and my engine flushed about 3 weeks ago, now my car has an unbearable ticking noise from the rear left cylinder, I took the valve cover off and i noticed, there was still sludge on the non moving parts, and...

Hey guys. I have a 2005 300c 5.7, only mods I have so far is slp loudmouth1 catback and stage 2 afe intake. Just wondering what long tube headers and what cam to purchase?

Hey guys...just wanted to reach out to everyone for some specific feedback. I've installed Corsa catbacks, JBL shorty headers, a cold air intake and had the car dyno tuned with my Diablo Predator. It seems to be running nicely, but I am looking for a little more "ooomf". On other threads, a...

Just moved to Baltimore and am looking for any good speed shops near baltimore or maryland in general. dont really mind a drive. specifically looking for a shop to do a cam shaft swap. Thanks!