Chrysler 300C & SRT8 Forums banner
chrysler 300
1-20 of 20 Results
  1. "My Build, My Car!"
    so i have changed the tcm the fuses and relays all of them ad im getting a esp bass light and traction control plus every time i brake its giving me a wobble on the front right wheeel i was thinking it was a wheel speed sensor if so how can i disconnect the abs to not have to deal with this or...
  2. 2005-2012 LX models: Yearly Changes and New Featur
    I need help, so I had a 2014 chrysler 300 that it won't start,normally to start the car it says press brake to start engine, but in my situation it says press clutch to start engine the problem is that my car is automatic and an automatic don't have clutch can someone tell me how to fix it
  3. Suspension/Handling Modifications
    When lowering your 300 do you need to cut the fender liners or roll your fenders?
  4. Car Audio/Alarms/UConnect/Navigation
    Whats up Mopar fam Not sure if there is already a post for this but, i have a 08 chrysler 300c and a buddy of mines gave me the UConnect touch screen from his 2018 srt Jeep. Are these devices just plug and play? And also is there any brand of aftermarket parts that I can buy to install the...
  5. Modes & Functions
    Hey guys, I just purchased an ‘05 300C with 100K miles. The power with the Hemi is incredible and the style lines are cool. It is the Daimler Chrysler so it has some of that Mercedes technology in it. What issues should I watch out for in the future? Thx.
  6. General Discussion
    Hey guys I recently purchased a used 2005 Chrysler 300 Touring 3.5L V6 with a little under 107,000 miles on it. The car has been good to me so but there are two big gripes I have with it that I would love to get fixed and I thought this may be the right place to come to for assistance. The front...
  7. General Discussion on Issues / Trouble Shooting
    Ok so maybe there is a post already on this but i cant seem to locate so here i go...............07 300 base model 2.7L 42RLE has 83k trans acts like brakes are applied when in low gear or reverse, i have put vehicle in nutral and as it slow down it acted like the brakes were being applied until...
  8. Wife's Whip

    Picked up my 300c from copart auction. both heads were blown, dropped valve seats on all 8 cylinders. 3 cratered pistons, and 3 completely demolished combustion chambers. Completely rebuilt the pistons, rebuilt cylinders, rebuilt heads. New head gaskets, new head bolts. Computer re-sync. New...
  9. 1st Gen SRT8-Specific General Discussion
    Is it possible to mount a body from a C10 on a Chrysler Srt8 I have a salvaged due to hail 300 srt8 and a 1985 C10 The truck need an engine trans and would love to be able to get suspension, Brakes, Etc.
  10. General Discussion on Issues / Trouble Shooting
    Hello Everyone, I'm so frustrated and at my WITS end with my 2005 Chrysler 300 2.7 Mean Vanilla. My wife drives this car mainly, it has over 260k miles on it and this summer she was driving when suddenly she heard a loud pop and saw smoke. She pulled over and all the coolant had leaked out of...
  11. Appearance General Discussion
    Hey everyone, I just wanted to change out the stock grille on my 2014 300 to the black chrome one that is standard on the SRT8's. If anyone has done this before I just basically want to ask, how do you do it?! Anything to look out for? Is it hard to do yourself? Any help is really appreciated...
  12. Australia / NZ Meets/Greets/Events
    Remember to Slip, Slop and Slap Meeting Point: Pinjarra Bakery - MADDINGTON Finishing Point: 101 South Perth Esplanade Meeting Time: 10:00am Departure Time: 11:00am Arrival: Time: 11:30am Coffee Van Attending: No Reminder: Whilst I would not expect any issues with Chrysler Owners...
  13. General Discussion on Issues / Trouble Shooting
    I need some help basically trying to add a shifter knob from a 2015 Chrysler 300 to my 2013 Chrysler 300 v6 with the 8 speed transmission. when I connect it the power comes on but can't do anything with it. any help would be greatly appreciated. when I connect the original shifter and splice...
  14. General Discussion on Issues / Trouble Shooting
    This is a problem that ive been dealing with for a while now on my 2009 heritage, however its getting worse and worse as time goes by. whenever the car is on an upwards incline the car begins slowing down, almost like the engine shuts off, and it will do this for a few seconds at a time, until...
  15. 2nd Generation Chrysler 300 Discussion
    We installed the Whiteline Suspension sway bar kit and Bump Steer on fatchance 2.0, this kit is incredible and very complete. The stock sway bar is 30mm front and 15mm rear, the whitline bar is 32mm front and 18mm rear. The install is straight forward, and the fit and finish are on point...
  16. Appearance General Discussion
    Hey guys, So I went on ebay and bought a 3m spoiler for my 300. The problem is that it comes straight, and i need to bend it. I have some ideas on how to do it but I wanted to hear from you all first. My idea was a couple clamps and a heat gun. What do you think? Thanks!
  17. My Chrysler 300 Base

    2006 cool vanilla Chrysler 300 2.7l all still stock. I just painted side mirrors and fog light area cool vanilla and tinted windows.
  18. My Chrysler 300 Base

    2006 cool vanilla Chrysler 300 2.7l all still stock. I just painted side mirrors and fog light area cool vanilla and tinted windows.
  19. My Chrysler 300 Base

    2006 cool vanilla Chrysler 300 2.7l all still stock. I just painted side mirrors and fog light area cool vanilla and tinted windows.
  20. My Chrysler 300 Base

    2006 cool vanilla Chrysler 300 2.7l all still stock. I just painted side mirrors and fog light area cool vanilla and tinted windows.
1-20 of 20 Results
Top