Chrysler 300C & SRT8 Forums banner

misfire

  1. SRT8 Running Odd with no codes

    1st Gen SRT8-Specific General Discussion
    Good morning all, I have a bit of a strange situation with my 2006 Chrysler 300c SRT8 with the 6.1. I recently changed the intake manifold gaskets and plenum (I used no RTV on either). I changed them because of oil seepage from the intake area and a major leak on both sides of the intake. After...
  2. Engine misfire at idle + ABS light

    1st Gen SRT8-Specific General Discussion
    Hey guys, I've been a fan of the 300C, especially the SRT8 since it came out. So you can imagine how happy I was when I found out, that I have a chance of getting one. Anyway so the one I'm looking at has misfiring at idle and the ABS light is on. The ABS light and misfires MIGHT not be...
  3. TIP - Trying to track down a misfire gremlin?

    2nd Generation Chrysler 300 Discussion
    Benefit from my experience... If you're pulling out your hair trying to track down a misfire gremlin and all seems ok, check the intake manifold seams. The seams can open and cause vacuum leaks which in turn cause mixture variations and misfires.
  4. I need help!

    General Discussion on Issues / Trouble Shooting
    Hi everyone.
  5. High RPM Stutter

    1st Gen SRT8-Specific Problems/Dealer Service
    I have a 2006 300C SRT8 157,000 miles Mostly stock: Cold air intake, throttle body replaced, gas tank replacement for stall on fill-up issue The car is generally running pretty well, but above 3,000RPM the engine begins to stutter aggressively and won't accelerate until I release the...
  6. Multiple cilinder misfire

    UK & Europe Regional Forum
    Hi there, Have a problem with my 2006 300c Touring (3,5L), engine light turns on in cold engine condition. Feels like the power is gone for a few seconds. With warm engine no problem. Got it diagnosed and the report shows: Multiple cilinder misfire. My own garage advises to change the ignition...
  7. EGR tick?

    General Discussion
    Hey guys, did some research and still cannot pinpoint the exact root of this issue I'm currently having. 2006 Chrylser Touring. Noticed the other day while driving no matter what the speed may be, when I let off the accelerator and press it again I hear a single "click" sound coming from...
  8. Engine shudders/Vibrates often 60pmh+ and varying intensit

    General Discussion on Issues / Trouble Shooting
    2005 Chrysler 300 3.5 V6 Engine shudders/Vibrates intermittently and varying intensities This is long but I wanted to include as much detail as I could. The engine shudders/vibrates when accelerating and driving sometime at 40 mph but most often when 60mph and above, it stops if I let off the...
  9. 2006 300 srt8 valve spring broken

    1st Gen SRT8-Specific General Discussion
    Hi, My car is at the dealer right now and I just had the news that it has a broken valve spring on cylinder #7!! That sucks!! I started the car yesterday morning (it was a cold morning) and the car was shaking at idle. Went to work and everything seemed fine when car was hotter... Than, when...
Top