Chrysler 300C & SRT8 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. General Discussion
    Long story but here it is My 300c 5.7 hemi spun out in the highway and hit a curb broke the driver rear knuckle and a few control arms sat for 3 months before even attempting any work as it was mid December and well below zero here in Minnesota but the time came to tackle the job got under it...
  2. "My Build, My Car!"
    So I pickup a 05 300c with 180k.. cat back exhaust, intake,aftermarket deck Ran fine for a week. Then I started getting this code. So have replace the tcm..same problem So I replace the pcm..same problem Iv clean and check ever ground I could find. Now I get codes p0700 and u0101. I know what...
  3. General Discussion on Issues / Trouble Shooting
    Aloha, if anyone has any suggestions I would greatly appreciate it. 2006 Chrysler 300 3.5 Limited Been stalling at lights and stopped intermittently with oil light coming on. Discovered oil temp sensor was leaking. I cleaned and replaced sensor with new one and that made the stalling less...
  4. General Discussion
    I've had my 06 300 signature series since april. It was a clean title leased at 7k miles a year for nine years prior and came with 62.5k on it. I've put another 10k on it and yesterday my oil pressure light came on and started beeping. I took it to autozone they coded p0700 and 0730 but...
1-4 of 4 Results
Top