Chrysler 300C & SRT8 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. General Discussion
    After spending 3 hours removing my wife's starter due to way too short cables I made my own with a 2 gauge main and 14 gauge solenoid cable to hook into the factory wires so it takes 20 minutes next time.
  2. General Discussion
    I removed the starter from my wife's 07 W.P. Chrysler Signature Edition AWD, took me 20 minutes to remove the heat shields, steering rod and drop the rack Then 3 hours to remove the nut holding the battery cable to the solenoid, there was no way to get a socket on it with or without extensions...
  3. General Discussion
    What is the most efficient way to remove an 07 3.5L starter, just from looking at it, it looks like remove the air intake tube possibly filter box, remove motor mount heat shield, remove motor mount and get it out. I looked at the Haynes manual instructions and it said something about...
1-3 of 3 Results