Chrysler 300C & SRT8 Forums banner
suspension
1-19 of 20 Results
  1. CRD Wheels / Tyres / Suspension / Brake
    Hi, just picked up a 1st Gen 2007 crd with 50k on the clock, and she's a beaut, however I'm going to need a couple of part numbers off you guys because I believe Chrysler left the UK a few years back. It needs a front right ABS sensor which should be straight forward enough. The second one is...
  2. Suspension
    Ive been trying to find anyone who can help me choose between coilovers, lowering springs or springs and shocks. I've been looking at the Eibach Sportline System. It comes with springs and shocks. The price is great but I just want to make sure I make the right choice. I'm running 255/35/20 in...
  3. General Discussion
    Recently aquired a 2011 300(V6) and my dad has a Hellcat charger with aftermarket wheels we were wondering if we can put the factory hellcat wheels on it without having to worry about rub on the suspension, also whats the largest size wheel you guys recommend?
  4. 2nd Generation Chrysler 300 Discussion
    Happy Friday, fellow Spartans (300 joke), I purchased my 2012 300 back in March. It is approaching 100,000 miles and I can feel that there is some play in the front end. So, I did what I always do: Research the symptoms online and then purchase parts from Rock Auto. So, I have new ball joints...
  5. 1st Gen SRT8-Specific Wheels/Tires/Brakes/Suspensi
    Okay So I have a 2006 Chrysler 300 SRT8. It needs a lot of work and I've been getting it done slowly. I have a guy that has the Bilstein b12 pro kit 46-234377. First of all, will this fit? How much drop? If I read correct, 1.5 inch (front) and 1.9 inch (rear) Is this too low? Will it rub my...
  6. General Discussion on Issues / Trouble Shooting
    Attention Admins and forum mods, I am new to forums, should my posting be in the wrong place, I respectfully request that you move it to the proper place. Thank you. Good day. Thank you to all who have contributed a wealth of knowledge on the Chrysler 300 forums, it has been an immense help...
  7. 2nd Generation Chrysler 300 Discussion
    I have a 2011 Chrysler 300c with awd, looking to lower it a little when the new wheels go on. Anyone know what my options are outside of BC coil overs? Just getting as much information as I can before I buy.
  8. Suspension/Handling Modifications
    Hi all, i've been browsing these threads for quite sometime and noticed alot of us have had problems with our suspensions at some time. i bought my car about 1 year ago and have already replaced front tension strut driver side, tie rod ends only to have the noise reappear ::frown:: the latest...
  9. 2nd Generation Chrysler 300 Discussion
    Hi all, I've been experiencing a slight warble/wobble in the steering wheel. It's mostly nonexistent when driving in a straight line, but on a smooth road at about 45mph it lightly wobbles when I turn the wheel gently either direction. I bought the car new and it started out undetectable but...
  10. CRD Wheels / Tyres / Suspension / Brake
    Hi everybody! Bushings on both of my front lower control arms are ripped to pieces. Both arms have shifted sideways towards the front of the car and are now rubbing against the engine cradle. I need them replaced asap. I'll be doing it myself and I'm currently looking for replacement parts...
  11. Suspension/Handling Modifications
    Why haven't Chrysler updated to aluminum suspension parts other than to keep the cost down? And why haven't I been able to find any aftermarket Al parts either? Even though the suspension is copied from Mercedes, it still doesn't ride as well as one. The spring rates, bushings etc. on non SRT...
  12. CRD Wheels / Tyres / Suspension / Brake
    My 300c suspension has done a great job for over 130,000 miles but there most be a lot of worn components and it feels soft and has more than a few clunks and noises. As the car owes me nothing now, having given great service, I am thinking of a complete refresh of the suspension - maybe a...
  13. General Discussion
    I'm a noob at all of this. I'm looking for a suspension kit that will provide clients with a comfortable ride. Right now, as the driver, I can feel and hear everything that the car comes across on the road. I have a 2007 300C AWD with roughly 98k miles on it and stock suspension. But I'm...
  14. 1st Gen SRT8-Specific Wheels/Tires/Brakes/Suspensi
    Hey guys, I just upgraded my LX model and bought a 2006C w/ 80k miles on it. (Bad credit-High Miles). It has all stock wheels, suspension, etc. I'm looking to put 20 or 22" Replica SRT8 wheels on it, but before I do that... I want to make sure my suspension is solid and feeling like new. I...
  15. Suspension/Handling Modifications
    So i use to work at a place that had quite a few rail roads that are in bad shape for the past few years (industrial port). I want to get my car worked on but really have no clue about suspension maintenance. I have researched the forum and found some great tips...Oh and i have 22" rims which...
  16. Suspension/Handling Modifications
    Hello everyone! I am a new 2006 300 4TR AWD owner and after about 3000kms of ownership I have a front right wheel bearing on the way out as well as a sudden case of the squeaks in the front end. It sounds like ball joints though I am not entirely certain. I am coming from 2 Eagle Talons (back...
  17. Suspension/Handling Modifications
    I have a 2007 300c AWD, second owner purchased from a dealer mechanic & in fantastic shape.... really mint. 55k on the odometer. Weird thing is that I usually push a car pretty hard during a test drive to feel it out and did notice that the brake rotors would soon need replacing, but now I'm...
  18. Parts Buy/Sell Forum
    Hello there everyone! Up for sale are these USED Eibach lowering springs and factory shocks for the Chrystler 300. I had these on my 2007 Chrystler 300 (BASE MODEL) for about 2 years. You should expect about a 2 inch drop in the front and back, which will eliminate that nasty looking fender...
  19. Suspension/Handling Modifications
    Hello guys I dont know which spring to go with either a 2" drop or a 1.6" I dont want to roll the fender and i dont want any rubbing. Since I changed the lower control arm it seems to sit high in the front. please send me pics 300C lowered springs only. all brands take a look at my car and...
1-19 of 20 Results
Top