Chrysler 300C & SRT8 Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
435 Posts
Discussion Starter #1
Okay, so...after reading most (if not all) the post about wheels and offsets... I have to ask my own Question,
I have a '05 300c- running the
OEM 18" wheels
,
18x7.5j
5X115
+24
71.5cb.

I'm looking at running 245/45/20- for keeping the speedo as close to accurate as possible.
Wheels, I'm going to

VERDE STYLE 78- HELIX
dia x width = 20x8.5
BP = 5x115
Offset = +20
CB (Hub) = 74.1 (hubcentric ring incl. w/ purchase)


Anyone running a similar setup, with any style rim, but the same dimensions/specs?
And have you had any problems with rubbing, turn ratio, vibration, casting, ect...


I know there will be
9mm less on the inside from the inside of the wheel to the strut housing & It will extend the outside edge of the wheel 17mm more

I'm trying to avoid "fixes" and/or other problems that come along.

Me and my pocket book would appreciate your input/feedback/and help greatly.
 
1 - 1 of 1 Posts
Top