Chrysler 300C & SRT8 Forums banner

1 - 20 of 23 Posts

·
Registered
Joined
·
464 Posts
Discussion Starter #1 (Edited)
Hi guys...In 2006 I have dealt with Welcome to B&G Performance "A World Leader in DCX & EURO Tuning Solutions" - Dodge/Jeep/Mini/Bentley Motors/AMG/Mercedes/Ferrari/Porsche PCM/TCM(Computer)Flashes and had my PCM re-flashed and it was day and night difference....does anyone know if they can re-calibrate the 6.4 Hemis? They do state that in their site, but I live at the other side of the world with time difference problems...can anyone call them and let us know....pleeeeease.

Thanks guys:kiss:

maherm
 

·
Premium Member
Joined
·
7,787 Posts
sorry, the new engines have a form of encryption that has us all locked out.

But good things are coming...
 

·
Registered
Joined
·
5,045 Posts
There is a workaround to recalibrate the 6.4s. It involves buying a 09-10 5.7L PCM and swapping that. You can tune that PCM, as Modern Muscle is doing.
 

·
Registered
Joined
·
464 Posts
Discussion Starter #4
Thank you guys, again...did anyone contact B&G and got that cleared? back in 2006 everyone said it was not available, but B&G did have the programming because from what I heard...the programmers of B&G are official chrysler programmers :)....maybae it is not true, but I remember that Hennessey were doing all of their programming through these guys....I did send them an Email with no response yet.
I would appreciate if any of u guys could enquire by phone on their programming for the 6.4, as advertised on their website.
Thanks in advance
 

·
Premium Member
Joined
·
1,547 Posts
There is a workaround to recalibrate the 6.4s. It involves buying a 09-10 5.7L PCM and swapping that. You can tune that PCM, as Modern Muscle is doing.
That only works for Challengers. A 2012 Challenger is about the same as the 2009/10. They didn't get the extensive technology upgrades that 300's and Chargers did.
 

·
Registered
Joined
·
5,045 Posts
That only works for Challengers. A 2012 Challenger is about the same as the 2009/10. They didn't get the extensive technology upgrades that 300's and Chargers did.
Wrong. :) Give me an 09-10 LX and a new 392 crate motor and I'll make it work, tuning and all. Few little details you must have overlooked.
 

·
Premium Member
Joined
·
1,547 Posts
Wrong. :) Give me an 09-10 LX and a new 392 crate motor and I'll make it work, tuning and all. Few little details you must have overlooked.
This thread is in the 2nd Gen SRT-Specific area - it is talking about tuning for 2nd gen cars, not just their motors. Of course you can put a 392 or 426 or whatever you want in any 1st gen vehicle and tune it, that's easy.
 

·
Registered
Joined
·
464 Posts
Discussion Starter #8
Thank u guys for the replies, I am buying a 2012 300 srt8 next week....replacing my 2006 one. I just needed someone to help me in contacting B&G on the programming issue....I do appreciate ur inputs.Thanks
 

·
Registered
Joined
·
5,045 Posts
This thread is in the 2nd Gen SRT-Specific area - it is talking about tuning for 2nd gen cars, not just their motors. Of course you can put a 392 or 426 or whatever you want in any 1st gen vehicle and tune it, that's easy.
Correct, and you can still utilize the 09-10 PCM. Again, look into it further. :)
 

·
Premium Member
Joined
·
1,547 Posts
Correct, and you can still utilize the 09-10 PCM. Again, look into it further. :)
Please post a verifiable link to a 2012 Charger or 300 SRT8 that is being tuned.
 

·
Registered
Joined
·
43 Posts
Correct, and you can still utilize the 09-10 PCM. Again, look into it further. :)
Im no Chrysler engineer, but doesn't that seem sketchy? Are you referring to the Challenger 6.4 PCM? I personally wouldn't test this, my old 6.1 didn't have MDS, and other things my current 6.4 has...
 

·
Registered
Joined
·
464 Posts
Discussion Starter #12
Very informative and interesting guys, thanks alot.
btw. did anyone contact B&G and ask THE QUESTION? :) Pleeeeease
 

·
Registered
Joined
·
236 Posts
i have a 2012 300 SRT8, and i know some of the most advanced people in the business for tuning and upgrading the SRT8's and to date the top minds have only been able to tune the challengers because they are the same workings as their older models, so a swap of computers is viable but on the 2nd generation srt8 chargers and 300's this cannot be done, But, and this a only a but, there is supposidly a guy from michigan who has tuned a charger srt8 2012 but only because he has access to the encryption codes thru chrysler, they say he is on the forumns but i havnt found him yet, i live in michigan and that is the talk around here.
 

·
Registered
Joined
·
464 Posts
Discussion Starter #15
do u mean B&G?:theyareon

B&G Chrysler Specialists, Inc.

24280 Ryan Road

Warren, Michigan

48091


i have a 2012 300 SRT8, and i know some of the most advanced people in the business for tuning and upgrading the SRT8's and to date the top minds have only been able to tune the challengers because they are the same workings as their older models, so a swap of computers is viable but on the 2nd generation srt8 chargers and 300's this cannot be done, But, and this a only a but, there is supposidly a guy from michigan who has tuned a charger srt8 2012 but only because he has access to the encryption codes thru chrysler, they say he is on the forumns but i havnt found him yet, i live in michigan and that is the talk around here.
 

·
Registered
Joined
·
464 Posts
Discussion Starter #17
can someone just pick up the phone and call B&G already to verify and let us all know? please
 

·
Registered
Joined
·
178 Posts
maherm,

B&G have already released the PCM TUNE for the 6.4L, a few guyz on the challenger forums already have it and they luv it.

Goodluck
 

·
Registered
Joined
·
464 Posts
Discussion Starter #19
:wavey: Thanks BuNajim
maherm,

B&G have already released the PCM TUNE for the 6.4L, a few guyz on the challenger forums already have it and they luv it.

Goodluck
 
1 - 20 of 23 Posts
Top