Chrysler 300C & SRT8 Forums banner

1 - 20 of 85 Posts

·
Registered
Joined
·
597 Posts
Discussion Starter #1 (Edited)

300 Replacement LED Kit

At Diode Dynamics, we carry a full line of LED bulbs, to replace your map lights, license plate lights, vanity lights, trunk light, turn signals, fog lights, and more!

We carry the brightest, highest-quality bulbs at the lowest prices. Your order will ship same day, and we're here if you need us for support and service. And we do not jack up the prices to astronomical levels- We're breaking that market trend, and offering you great, low prices, every day. These LED bulbs are designed by us here in St. Louis, and every bulb carries with it a three-year limited warranty.

Our LED Conversion Kits include all of the LED bulbs you need to replace the incandescent bulbs in your vehicle, for interior and license locations. It has been tested in your specific vehicle, for perfect fitment, and no guesswork! No modification is required for installation, you simply replace the bulbs!
We are pleased to offer these LEDs in a truly customized way. You can create the kit that you prefer. Simply change the quantity to "0" for any bulbs that you do not wish to purchase.


By using the ordering options on this page, you can create your own mix-and-match kit by making the proper selections on each stage, or choose one whole kit that you prefer. The product pictures are professionally taken, at the same camera settings, in order to provide an accurate idea of what the bulbs will look like, in terms of brightness compared to the factory bulbs.


Brightness. We offer three levels of brightness, or "stages." All stages will provide a sharp, modern LED look, and all include the same number of bulbs. Please be sure to read all of the following information:
  • Stage 1: Near factory brightness.
  • Stage 2: Slightly brighter than factory.
  • Stage 3: Much brighter than factory.
  • Stage 4 Flexlight: (Trunk only) This is a flexible LED strip with connector, for plug-and-play installation. It replaces your factory trunk light, and can be positioned anywhere you would like, with included velcro and adhesive.
All brightness levels are for general reference only, and apply only to the use of white LEDs. Please see the note below regarding the use of colored LEDs.


Please note that the stage 3 trunk light is often an LED board, which must be installed directly on top of the trunk light housing to achieve maximum brightness. All other lights will fit inside of the light housing with no modification. Some stage 3 interior lights use direct-replacement adapters with an LED board for maximum brightness.


Color. White is our most popular color. It is a 6000K cool LED white. We also offer yellow, green, blue, and red, at no additional charge. When making your color selections, please bear in mind that white projects the most usable light, so white will appear brighter than the same stage of a colored bulb, usually by one stage difference. For example, a red stage 3 light will have a similar usable light output as a stage 2 white light.


All products by Diode Dynamics are backed by a 30-day satisfaction guarantee and a three-year limited warranty.


Need Info? Need to Order? Click Below!

Chrysler 300 LED Lighting






Need Info? Need to Order? Click Below!

Chrysler 300 LED Lighting


Questions? Send a PM or email [email protected] or call: (314) 205-3033

****We have products for all 300s****

*PM us for the free-shipping code* (U.S. forum members only)

Thanks for looking!
Nick C.
Diode Dynamics​

Customer Submitted Reviews:


"NICE COLOR I RECEIVED SHIPPING TO AUSTRALIA WAS VERY FAST" (Posted on July 18, 2014) -Carlos

"These LEDs were direct fitment bulbs, their chart posted on a forum helped find desirable brightness levels. Would definitely buy from again!" (Posted on October 10, 2013) -Bob

"Real bright, easy install, great quality. They illuminate my diode license plate frame nicely" (Posted on January 29, 2014) -Matthew

 

·
Registered
Joined
·
597 Posts
Discussion Starter #3

·
Away From 300C Forum
Joined
·
19,587 Posts
Nick,

Have you come up with a full kit of bulbs for the first gen interiors or do we need to pick them out, one by one, on your site?
 

·
Registered
Joined
·
597 Posts
Discussion Starter #7
Nick,

Have you come up with a full kit of bulbs for the first gen interiors or do we need to pick them out, one by one, on your site?
We haven't put together a full-300 specific kit on the site yet, but we still have every bulb needed for both generations: 300 - Chrysler - Bulbs By Vehicle - Lighting

If you have any questions, please feel free to give us a call: (314) 205-3033

We can walk you through the listings and help you find the look you are going for

Nick C.
 

·
Registered
Joined
·
37 Posts
ok looking to order been on the site, I need all interior bulbs plus lights under door and license plate light. I wish you guys had full kits but any way as for brightness I just need slightly brighter then stock for all bulbs.
 

·
Registered
Joined
·
597 Posts
Discussion Starter #12
ok looking to order been on the site, I need all interior bulbs plus lights under door and license plate light. I wish you guys had full kits but any way as for brightness I just need slightly brighter then stock for all bulbs.
We will have more 300c specific lighting once we have another one in our studio for product comparison photos. Our production team will also make installation videos, and DIY guides

If you have questions about which bulbs to select, feel free to give us a call: (314) 205-3033

Thanks!
Nick C.
 

·
Away From 300C Forum
Joined
·
19,587 Posts
Do you guys have anything specific for a 2014 Ram HD (projector headlights, horizontal foglights) in an LED foglight bulb? PM me please. :)
 

·
Registered
Joined
·
597 Posts
Discussion Starter #14
Do you guys have anything specific for a 2014 Ram HD (projector headlights, horizontal foglights) in an LED foglight bulb? PM me please. :)
We have a variety of options listed here for the Ram: Ram Truck 1500 LED and HID Lighting

In addition, we've designed switchback replacement boards for the factory projector housings

Please send us a PM for the free-shipping code!

Thanks,
Nick C.
 

·
Premium Member
Joined
·
2,015 Posts
We haven't put together a full-300 specific kit on the site yet, but we still have every bulb needed for both generations: 300 - Chrysler - Bulbs By Vehicle - Lighting

If you have any questions, please feel free to give us a call: (314) 205-3033

We can walk you through the listings and help you find the look you are going for

Nick C.
Any update to whether you put any interior kits together? I notice on your link that it only shows trunk, glove, vanity, and maps. Does that cover all of them? what are the ones above each rear door?

I'm very curious on the difference it makes in the car, mine is a first gen with the Dk Slate Gray/Lt Graystone interior. I'd probably opt for the stage 2 (slightly brighter).

Thanks, my shopping list continues to grow, partly due to your site
 

·
Registered
Joined
·
597 Posts
Discussion Starter #16
Any update to whether you put any interior kits together? I notice on your link that it only shows trunk, glove, vanity, and maps. Does that cover all of them? what are the ones above each rear door?

I'm very curious on the difference it makes in the car, mine is a first gen with the Dk Slate Gray/Lt Graystone interior. I'd probably opt for the stage 2 (slightly brighter).

Thanks, my shopping list continues to grow, partly due to your site
The 300C uses the same bulb sizes as the Charger's interior

It makes a very noticeable difference in the interior, especially with a cleaner white color

Here's a recent example in a 2015 Challenger with our various Map Light Options:



Nick C.
 

·
Registered
Joined
·
597 Posts
Discussion Starter #20
Vanity Light should be a 28mm Fuse style LED (fits your visor mirror lights)

The Rear-dome lights are a 194-sized bulb

If you have any questions, feel free to give us a call: (314) 205-3033

Thanks!
Nick C.
 
1 - 20 of 85 Posts
Top