Chrysler 300C & SRT8 Forums banner

1 - 17 of 17 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter · #1 ·
Anybody installed custom LED for the tail lights?
If so, please post pic's, how you did it & what you used.
I don't mean the Spyder LED's, they are ok but doesn't give you the look of a MB or a BMW tail lights. That's what I'm looking for the MB or the BMW look.
 

·
Registered
Joined
·
127 Posts
Discussion Starter · #2 ·
Anybody?????????????
 

·
Registered
Joined
·
362 Posts
patiently waiting........................



i saw a set of medium spyder lights on ebay the other day for $40 and was going to pick them up, but i still think ill wait for some other custom setup to come out....i want something thats really distinctive and noticable, perhaps even swap out the turning signals as well. lets get this thing moving folks, its been how long?, 2-3 months since there was a thread started on this!
 

·
Registered
Joined
·
127 Posts
Discussion Starter · #8 · (Edited)
Vendors any news about an aftermarket product on this topic???
 

·
Registered
Joined
·
275 Posts
It would be expensive - it would require fabricating (or refabricating) the taillight assemblies, since they are sealed.
 

·
Registered
Joined
·
275 Posts
You cannot insert one of those premade led replacement bulbs (except for the sypderlite) because the opening is only as large as a standard bulb. Now, if you wanted to cut a larger hole, put in a bulb and then glue it back together...
 

·
Registered
Joined
·
127 Posts
Discussion Starter · #12 · (Edited)
cmego said:
Now, if you wanted to cut a larger hole, put in a bulb and then glue it back together...
That is what I am talking about do anything with the tail lights but I want the finished product to look as similar to the OEM finish of a MB or a BMW Brake light.

I don't mind if the cost of it reaches $300 but more than that would be absurd.
 

·
Registered
Joined
·
528 Posts

·
Registered
Joined
·
1,048 Posts
Nice Look..Different

Redman said:
These guys almost had'em:
http://www.partsngo.com/index.asp
Said for me to email him (http://www.partsngo.com/CusService.asp#1 - which I did) and he would pass on to his supplier.
They make'em for everyother car on the road - how hard can it be?
http://www.partsngo.com/led lighting.html
So, here's starting an email campaign...
PS - Did find these on eBay:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33716&item=7976857145&rd=1
I sent an email..asking when also
 

·
Registered
Joined
·
528 Posts
Cant believe the custom partz guyz are ignoring this market.
Custom LEDs for the 300C oughta translate into over 25K unit sales, no?
 

·
Registered
Joined
·
1,048 Posts
Yes..

Redman said:
Cant believe the custom partz guyz are ignoring this market.
Custom LEDs for the 300C oughta translate into over 25K unit sales, no?
At Least that..could sell quite a few right here.
 
1 - 17 of 17 Posts
Top