Chrysler 300C & SRT8 Forums banner

1 - 20 of 24 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1 (Edited)
Hi,
I just install the mesh grille and don't want to use the Chrysler or ESG logo plate. Does anyone has a different emblem? or know where I can buy it?


thanks.
 

·
Registered
Joined
·
32 Posts
I used the rear emblem on the car.Ordered the part from my dealer and got it in one day. Used my Dremel to remove the posts and installed with the adhesive supplied. Get LOTS of complements on it.Looks great. Perfect size and fit.
 

·
Registered
Joined
·
562 Posts
I purchased the emblem from www.wyckoff-mopar-parts.com which arrived yesterday. Im still waiting for my 300C but here's some pic's of the grille with the emblem. The emblem does have 2 clips that need to be removed which are very easy to remove.
 

Attachments

·
Registered
Joined
·
143 Posts
My emblem didn't have clips...... I think that might not be the same one...
 

·
Registered
Joined
·
528 Posts
Well, it's not right but here's something that would "specialize" your "C". ;)
 

Attachments

·
Registered
Joined
·
27 Posts
idandte said:
which tool do I need to cut the posts, not sure what a Dremel is....

thanks
My emblem did not have posts, like I said it was from a LHS. Look at former post for part #.

P.S. A Dremel is a small variable speed grinder/polisher/drill electric tool. I am sure others can do a better job describing it, but that is my best effort.
 

·
Registered
Joined
·
562 Posts
The emblem from wyckoff-mopar-parts.com is larger then the other emblems i've seen on the grille. If you notice on my grille the bottom part of the emblem does not fit within the chrome area of the grille. You can compare the both and pick which one you like, mine is on the left. The post are pretty weak and I used a knife to cut both off and didn't need to fill or sand it down or even need any tools. Very easy to remove the post.
 

Attachments

·
Registered
Joined
·
272 Posts
attydude said:
My emblem did not have posts, like I said it was from a LHS. Look at former post for part #.

P.S. A Dremel is a small variable speed grinder/polisher/drill electric tool. I am sure others can do a better job describing it, but that is my best effort.
no, i think a dremel is a small monkey like creature that lives in zanzibar.
 

·
Registered
Joined
·
38 Posts
Redman,

I have seen the bentley symbol before in the 300c forums but have not taken the time to search for it. Do you know of a site or supplier that is selling them. I guess I can go an exotic car store and ask but seems like it has been mass produced otherwise...

dave
chicago
 

·
Registered
Joined
·
170 Posts
I also went with the "300 C" badge from the rear of the car. Here is a picture.

Please forgive the "dirt" :( ... it rains a lot up here in Seattle.
 

Attachments

·
Registered
Joined
·
23 Posts
we use the rear badge at the dealer for our grilles cuting off the posts. the part number is 4805988AA List price is $50.02 I could sell them to you guys for $41.00 call is interested.

(215) 492-8333
Craig Dains
 

·
Premium Member
Joined
·
829 Posts
catchMEifUcan said:
I also went with the "300 C" badge from the rear of the car. Here is a picture. Please forgive the "dirt" :( ... it rains a lot up here in Seattle.
That looks nice. I'd love to see a clean picture in good daylight if you get a chance. (Hopefully you won't have to wait until next summer for that opportunity!):D Ah, the joys of living in the Great NorthWet!
 

·
Registered
Joined
·
528 Posts
Da Shizzle

Looking for the originators of these "Bentley" logos - very cool :p (Thanx 300C On 23s).
Will post soonest.
 

Attachments

·
Registered
Joined
·
143 Posts
Redman said:
Looking for the originators of these "Bentley" logos - very cool :p (Thanx 300C On 23s).
Will post soonest.
Who in their right mind would actually want to try and say their car is a bentley? Now that's ghetto fab.....
 
1 - 20 of 24 Posts
Top