Chrysler 300C & SRT8 Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
677 Posts
Discussion Starter · #1 · (Edited)
Please note that this FAQ is currently in development, if you have any comments or suggestions please feel free to post.

General Info:
There are currently 3 Catback systems for sale on the market for the Chrysler 300c. These systems are also compatible with the Dodge Magnum R/T which shares the same powerplant as the 300c. The AWD 300 models require a different set of bends in the exhaust, therefore a different system alltogether.

Mopar Performance Cat-Back Kit
MSRP $899.00 Street Price: $739.95

This system is made by Borla and retains the Borla engraving on the exhaust tips. The mufflers themselves have the Mopar logo and name stamped on them. This catback system does not retain Borla's million mile warranty.

Since it's a mopar product, would we be able to have the dealer install it as a dealer installed option and fall under new car's warranty?
You could have the dealer install it when you purchase your car. It would not fall under the 3 36 warranty because it is a performance part. Even though Mopar makes and markets this piece all Mopar Performance parts are treated as "aftermarket" parts and have no warranty.

Mopar Catback System Video Clips:
Courtesy of Morty
Courtesy of Damsea

Stainless Steel Cat-Back™ System 3.5" Tips Part #140112
MSRP $849.99 Street Price: Too low to post here. Contact Forum Sponsor [email protected] for pricing.


From their site:
BORLA Cat-Back™ exhausts feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium Aircraft-Quality T-304 Stainless Steel, an alloy superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
This kit is identical to the the Mopar Performance system except for the Borla logos on the mufflers themselves.

Borla Catback 3.5" System Video Clips:
Courtesy of forum member Joshmillslane:
Wide Open Throttle
Start and idle
Startup Inside
Outside Revs

Courtesy of HemiMadness:
Dyno Run

Borla Stainless Steel Cat-Back™ + H-Pipe Part #140125 MSRP $999.99 Street Price: Too low to post here. Contact Forum Sponsor [email protected] for pricing.

Courtesy of 503 Motoring:

From their site:
BORLA Cat-Back™ exhausts feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium Aircraft-Quality T-304 Stainless Steel, an alloy superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
This kit removes the rear mufflers from the 3.5" System and replaces the 3.5" tips with 5" tips.

Borla Catback 5" System Video Clips:
Courtesy of 201RTawd from dodgemagnum.net
 

·
Registered
Joined
·
677 Posts
Discussion Starter · #2 ·
Magnaflow Cat-Back Exhaust System Part # 15629
MSRP $945.55 Street Price: $599 at High Horse Performance


Courtesy of Aspendog:



From their site:
Additional Information
All Stainless Steel, Mandrel-Bent, Cat-Back Exhaust System With Polished Stainless Steel Tips.
Not much info eh? Lets let the pictures and video clips speak for themselves...

Magnaflow Cat-Back Exhaust Video Clips:
Courtesy of Bobf over at dodgemagnum.net-
Inside
Cruising
Revving & Launch
Revving
Just for reference. No exhaust at all!
 

·
Registered
Joined
·
81 Posts
In an earlier thread, some folks mentioned the sound got a little tinny at speed when the MDS kicked in. The 'cruising' clip sounded OK to me.
 

·
Registered
Joined
·
349 Posts
What is the part number for the AWD borla?
 

·
Registered
Joined
·
179 Posts
BUMP!

We need fresh links Rouge! ps. headed to dodgemagnum.net
 

·
Registered
Joined
·
442 Posts
The Magnaflow looks the best, but FYI, High Horse lists this at $728.94.
If you call Josh, and you are a member of the forum, the price will come down
alot! You have to call or e-mail him for the real price.

Jim
 

·
Registered
Joined
·
11 Posts
I am looking for a system that will provide a bit more roar when accelerating, but won't be appreciably louder when cruising. Any recommendations?

Also, does anyone have any performance data for the Magnaflow system?

I've found the following for the others:
Borla 5" ------- +10-15 HP/30 ft-lb
Borla 3.5" ----- +16 HP/8 ft-lb
Flowmaster --- +10-15 HP/26 ft-lb

How reliable are these numbers? Is there any scientific reason why the four muffler Borla system should provide (slightly) more HP than the others, while the others proved (significantly) more torque?

I am looking for a system that will provide a bit more roar when accelerating, but won't be appreciably louder when cruising.

P.S. I'm also undecided as to whether to put an Airraid or a K&N AirCharger or Typhoon in. Has anyone found a listing of which states the AirCharger might not be streetlegal in?
 

·
Registered
Joined
·
122 Posts
Muffler

simply remove the suit case muffler and install a cross over pipe, car sounds wicked taking off, but will be quiet while cruising.
 

·
Premium Member
Joined
·
182 Posts
Hello All,

SoCal Motorsports is currently running a group buy on the Borla (140112 and 140125) exhaust and we have the best price around on the Magnaflow Exhaust.

Send Private Message to scmstony for pricing on any or all of the 3 systems. Those who mentioned intakes, well pricing is equally as great. The 1 Stop Shop. SoCal Motorsports!!!

Look forward to seeing the SoCal Members at the meet next Sat (the 11th).
 
1 - 11 of 11 Posts
Top