I'm looking at purchasing and installing this myself too with the same pin-out/wiring guide onto a 2006 300c 5.7, im an electrical engineer so once mine arrives (having to import from the US to the UK) I will be better able to help Unless of course you have already figured this out?
Kind regards,
Hayden.

 

Same Problem :-(

 

Wow, I thought this was plug and play system.

I'm still trying to workout which I need for my 2013 SRT

 

I got one and the dealer is putting mine in while I've got the car their for a few other things but I'm going to ask him exactly where it goes.
If that fails there is someone else here in Canberra that installed his himself so I'll be able to catch up with him to find, cause he already said he'd help me put it in but cause the car is at the dealers i didnt worry.

 

Yeah I had finally figured it out. The purple and yellow wire tap in to two wires on the back of the ignition harness. I just used some T-taps to do it, the rest was plug and play.

I removed this because I thought it was causing an issue with my tpms system which all goes through wireless control module. Come find out I just think I have aftermarket TPMS sensors that aren't compatible so I'm to reinstall the remote start.

 

Wonder if the next gen models install the same way.
Mine is in but not sure how it was done as yet

 

Must find out being an Aussie location hey

 

No luck at the dealer as they couldnt get it working so will try plan B

 

Flashlogic flrsch5



Just follow the directions in TYPE 3 - WIRING DIAGRAM - 1 OF 1!!!

There are 2 (TWO) connectors that plug into the backside of the ignition switch.

There is a LARGER 5 pin connector and a SMALLER 8 pin connector.

LARGER 5 PIN CONNECTOR DIRECTIONS FIRST:

Splice the PURPLE wire from the FLASHLOGIC T-HARNESS into the wire coming out of POSITION 4 OF THE LARGER 5 PIN CONNECTOR.

Splice the WHITE/YELLOW wire (WHITE WIRE WITH YELLOW STRIPE) from the FLASHLOGIC T-HARNESS into the wire coming out of the POSITION 2 OF THE LARGER 5 PIN CONNECTOR.

SMALLER 8 PIN CONNECTOR DIRECTIONS:

CUT AND INSULATE THE WHITE/YELLOW WIRE (NEXT TO WHITE/GRAY WIRE).

RUNNING LIGHTS DIRECTIONS:

If I remember correctly, you splice the WHITE/BROWN wire from the FLASHLOGIC T-HARNESS into the WHITE/BROWN wire coming out of the back of the HEADLIGHT SWITCH.

MAKE SURE TO REMOVE THE HEADLIGHT SWITCH CORRECTLY.

There is a YouTube video ("2005 Chrysler 300 touring headlight switch replacement") that shows you how to remove the headlight switch.

If you are having issues disconnecting the wire connectors from the ignition switch, take it out of the dash and you will have more room.

DO NOT, I REPEAT, DO NOT GET AGGRESSIVE WITH ANY OF THE WIRING CONNECTORS MENTIONED ABOVE, ESPECIALLY THE SMALLER 8 PIN CONNECTOR!!!

I HAVE LARGE HANDS WITH BIG FINGERS.

I USED NEEDLE NOSE PLIERS TO PUSH DOWN ON THE RELEASE TABS ON THE 8 PIN CONNECTORS AND ENDED UP CRUSHING BOTH THE FACTORY AND T-HARNESS 8 PIN CONNECTORS!!!

HAD TO BUY ANOTHER T-HARNESS FROM FLASH LOGIC AND 8 PIN CONNECTOR FROM CHRYSLER!!!

IF YOU NEED TO DISCONNECT ANY OF THE 8 PIN CONNECTORS, PRESS DOWN GENTLY ON THE RELEASE TAB, TAKE A VERY SMALL FLAT HEAD SCREW DRIVER AND WEDGE IT CAREFULLY BETWEEN THE PLACE WHERE THE MALE AND FEMALE 8 PIN CONNECORS COME TOGETHER. DO THIS ON EACH SIDE OF THE RELEASE TAB.

YOU JUST NEED TO "BARELY START" THE DISCONNECTION OF THE MALE AND FEMALE CONNECTORS WITH THE SMALL FLAT HEAD SCREW DRIVER ON EACH SIDE OF THE RELEASE TAB AND THEY WILL SLIDE RIGHT OUT!!!

IF YOU TRY TO JUST DO THIS PROCEDURE WITH JUST ONE OF YOUR FINGERS ON THE RELEASE TAB AND NOT DO THE SMALL FLAT HEAD SCREW DRIVER PROCEDURE, THE DISCONNECTION WILL NOT, I REPEAT, WILL NOT COME EASILY.

Let me know how it goes.

Thanks,
George

 

Awesome write up, the big thing is I have the next gen and not the first gen so is it very much the same or totally different.
Thank you again for the details though.

 

Do you have a Push Button Starter, or the regular key start?

 

push button

 

No splicing involved on the 2nd gen. very easy and all plug and play unless you want to worry about adding the bonnet stuff. (so it wont start if the bonnet is open.)

plug for the ODBC to piggy back off
plug at the back of the start stop button pops out and piggy backs of the harness and back on.
and 2 plugs at the back of the headlight switch that does the same.

 

great info Moparlife.

Can you advise which kit (part no) is the right one to order?

 

Flashlogic - FLRSCH10

 

Hi Moparlife,

Sorry for the delay.

I was researching the FlashLogic for your car, but got interrupted with our 2005 Chrysler 300 Limted getting locked up.

I just put a post in my thread with an update.

Had to have the car towed to the dealer VERY VERY EARLY last Friday morning.

The finally got to the car and "unlocked" it late in the afternoon. (I was there most of the day).

They got a "communications" error with the P0513 code.

Am waiting by the phone!!!

Glad to hear that your remote install will be basically "plug and play".

If you go on FlashLogic's website you can download the manual!!!

DON'T FORGET WHAT I WROTE ABOUT THE 8 PIN CONNECTORS!!!

Please keep us posted.

Thank you,
George

 

Well it works beautifully now and no probs with the connectors

 

Flrshch5

Have you done this yet if so can you give info on how you done it or got it done. I got a 2006 Crysler 300c myself.

 

My flash logic is all installed and starts the car via remote

Problem is the steering is lock when it starts with the remote any ideas

Sent from my SM-G920I using Tapatalk

 

Iv'e just installed my flashlogic today.
And got the same problem remote start works, but the steering lock does not release.
Anyone found a way to sort this.
Thanks in advance.

 

Hi Guys,

Looking to purchase however after viewing the site can't locate where I can order. Anyone able to provide a link for me to follow?

I'm located in Australia

 

Don't waste your money it don't work on cars out side the USA

Sent from my SM-G920I using Tapatalk

 

Its flash Logic Gavin and works on the 12 and higher model years

 

Can anyone say for sure that the FlashLogic CH5 will work on a 2007 300C in the UK - ie with the UK required Thatcham modifications to the Can-bus system (whatever they may be). If anyone in the UK has fitted one and can confirm, that would be great.

TIA

 

Mines an 07 and i can confirm the flashlogic ch5 will not work fully.
You still have to turn off and back on to release steering lock, which seems a bit pointless.
Ive not heard of any mods to the system to rectify this.

 

Thanks very much for the info. Clearly, it would be ideal if I did NOT have to do that but not necessarily a deal-breaker for me, as the point of remote start for me is to warm the car up without leaving the house, or when the train pulls into the station before walking to the car park - so turning the key off then on again to restart is a 2 second job.

 

I fitted it and remote start does work, but I have an odd problem: once the car is remote started the factory key will not unlock the car by the buttons. I have to use the physical key in the passenger door then hit the central locking button inside the door, so I can go round to the drivers side and get in. Does anyone else have this problem?

I was also supplied a Prestige Range extender but it came with no instructions. In the box was a lead adapter with a red and black breakout flylead. I assume this requires vehicle permanent live, but I am loathe to put voltage to it without instructions in case it is some kind of external trigger. As it stands, with no voltage applied to that lead, it ill not recognise the two remotes that came with it.

I have asked the supplier for help on both these issues and waiting for a response.