Chrysler 300C & SRT8 Forums banner
1 - 1 of 1 Posts

· Registered
4 Posts
Discussion Starter · #1 ·
Hey guys,
I have a 2013 Limited (Second Generation). At this moment I am running 2 Kicker CompR 15" subs off of a Kicker KX2400.1 with a Kicker KX400.4 running the stock speakers (Will be upgrading to JL C3600 components all round) and H/L conversion is being done with an Audiocontrol LC6i.
I am looking to design a ported box of around 8 cubic feet that will have a facia plate to mesh in and look stock (Minus the subs obviously :biggrin:).
I also still want to be able to access my spare tyre.
My thoughts at the current point are that the subs should be rear facing with the ports front facing. To get this big and still have access to the spare it is looking like custom trimming will have to be done all round.

Has anyone had any experience with this kind of setup?
If anyone has something like this and has any tips/designs(CAD Even) or even pictures that'd be awesome.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.