I did silverstars for low (projector) and high beams in my 300C. Not a problem except you need to remove the airbox to get at the drivers side bulbs. Work just great. They were "normal" and just slipped into place, like the stock bulbs. Kinda rotated to fit in as I recall.
Headlamps
The HID lights are those for low beam only or are they Low and High Beam. If not for both what type of blub is used. Also what blub fits the fog lamp. I just think it looks bad when you have this HID light then you have a nasty yellow light as a fog light right below it. I would want to replace this fog lamp at least and if the high beam is not HID would like to do the same. Thanks for any help
what blubs are reccommended to fit headlamps and foglamps open to any suggestions that would make these halogen blubs look more like and match HID lights.
what blubs are reccommended to fit headlamps and foglamps open to any suggestions that would make these halogen blubs look more like and match HID lights.
1 - 1 of 16 Posts
1 - 1 of 16 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Chrysler 300C & SRT8 Forums
Join the 300c forum community to discuss the Chrysler 300c, SRT8, horsepower specs, AWD system and so much more!
Full Forum Listing
Top Contributors this Month
View All
Smackeyacky
31 Replies
jonnyboi990
21 Replies
Curious Joe
17 Replies
Recommended Communities
