[tmjchrysler]

Alright so I just installed my new Putco LED Bulbs for my taillights/brake lights. Now when I turn on my blinkers it blinks twice as fast... like it would if you had one bulbs out, But both of them blink every time... just twice as fast. Is there any fix that I can do you make them blink a normal speed.

 

[Kaiser Bill]

you need some resistors in there....you can get plug in short harnesses with them included on ebay

e.g. http://www.ebay.com/itm/50W-Flash-R...Parts_Accessories&hash=item1e6908fad8&vxp=mtr

 

[tmjchrysler]

I don't know much about electronics... thats why I got plug and play LED bulbs so that I didn't have to do tons of wiring and things to fix it... but Im willing to try do you have a link to what i need or a place that i can research it.

 

[Kaiser Bill]

see my 1st post - theres a link in there now with a photo of what needs doing - its a no issue 30 second addition

 

[tmjchrysler]

alright... thank you... if i need help when I get them i will post on here when i get them.

 

[MADDOG]

You need resistors when you install LED turn signals.

Here's a good link. Scroll down towards the bottom for the resistors. A 10watt/100 ohm resistor usually does the trick.

LED Flashers Blinkers Resistors Load Equalizers for Turn Signal Replacement Bulbs Rapid Flashing Fix

 

[Kaiser Bill]

you got Putco bulbs....who are aware of the issue, because they make their own (identical) kit! LED Light Bulb Load Resistor Kit by PUTCO