Chrysler 300C & SRT8 Forums banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
165 Posts
Discussion Starter #1
TRUE DUAL 3" Stainless Steel Mandrel bent cat-back!!!

MagnaFlow Part # 16642
05-06 Chrysler 300C SRT-8
06 Dodge Magnum SRT-8
06 Dodge Charger SRT-8 ... pending validation

Features:
3" stainless steel mandrel bent tubing
dual 3" inlet/outlet High polished resonator
2 - 3" inlet/outlet High polished mufflers
Dual Split 4" slash cut double wall tips

Undercar View:


Rear View:


DYNO data: dyno in automatic mode - D
Stock:
Peak Wheel Horsepower: 372.3
Peak Wheel Torque: 366.1 lb-ft

MagnaFlow equiped:
Peak Wheel Horsepower: 383.1
Peak Wheel Torque: 382.7 lb-ft

Peak Wheel Horsepower gain: 11
Peak Wheel Torque gain: 16 lb-ft

Max Wheel Horspower gain: 19 @ 5500
Max Wheel Torque gain: 21 lb-ft @ 5200

DYNO Chart:


Sound Clips:
Rev and Launch
Drive By
Interior Sound

MagnaFlow Part # 16642
05-06 Chrysler 300C SRT-8
06 Dodge Magnum SRT-8
06 Dodge Charger SRT-8 ... pending validation

Features:
3" stainless steel mandrel bent tubing
dual 3" inlet/outlet High polished resonator
2 - 3" inlet/outlet High polished mufflers
Dual Split 4" slash cut double wall tips

Undercar View:

Rear View:


DYNO data: dyno in Auto-stick mode - 4th
Stock:
Peak Wheel Horsepower: 362.4
Peak Wheel Torque: 363.1 lb-ft

MagnaFlow equiped:
Peak Wheel Horsepower: 377.8
Peak Wheel Torque: 384.3 lb-ft

Peak Wheel Horsepower gain: 15
Peak Wheel Torque gain: 21 lb-ft

Max Wheel Horspower gain: 23
Max Wheel Torque gain: 24 lb-ft

DYNO Chart:

Sound Clips:
Rev and Launch
Drive By
Interior Sound

Richard
 

·
Registered
Joined
·
102 Posts
Any word on when the high flow cats for the SRT8 are going to be released?
 

·
Premium Member
Joined
·
165 Posts
Discussion Starter #3
BBSRT8 said:
Any word on when the high flow cats for the SRT8 are going to be released?
I don't about the supply line, but I have 48 sets in the main warehouse.

MAGNAFLOW 3" HIGH FLOW CATALYST #16420


MAGNAFLOW 3" CAT-BACK p/n 16642 / 3" HIGH FLOW CATALYST p/n 16420


Here are the numbers you have been waiting for:



Stock Baseline: 377 rwhp / 378 lb-ft
MagnaFlow 3" High Flow Cats: 386 rwhp / 389 lb-ft
MagnaFlow 3" High Flow Cats / 3" Cat-Back: 397 rwhp / 400 lb-ft

MAX HP gain: 24 @ 5300 rpm
MAX TQ gain: 25 @ 4700 rpm

PEAK HP gain: 20
PEAK TQ gain: 22

Our Cat-Backs tend to produce 11-15 rwhp (conservatively with others seeing up to 20) and the MagnaFlow High Flow Cats produce another 7-8 rwhp on their own. The combination nets 20 SOLID rwhp and across the entire curve. I'm sure additoional testing would have netted a 400 RWHP number but what is 2.2 rwhp :)
 

·
Registered
Joined
·
1,044 Posts
BBSRT8 said:
Any word on when the high flow cats for the SRT8 are going to be released?
Roy,
Call Scott at GS Motorsports...
he's got em' or can get em'...
Sincerely,
Chris
 
1 - 4 of 4 Posts
Top