Chrysler 300C & SRT8 Forums banner
1 - 10 of 10 Posts

· Registered
Joined
·
243 Posts
Discussion Starter · #1 · (Edited)
I know that it is not a 300. I figured since I am a member and so many have been nice I would offer a treat of my car at the track at launch...... BTW, it ran 13.3 at 104mph. It was about 90 degrees with very humidity.
 

· Registered
Joined
·
243 Posts
Discussion Starter · #3 ·
Thanks for the compliment. Those are Nitto Drag Radials. I had the wheels widened to 9.5 inches. Those are 305/45 series.
 

· Registered
Joined
·
2,419 Posts
Lookin' good!

bigslim said:
I know that it is not a 300. I figured since I am a member and so many have been nice I would offer a treat of my car at the track at launch...... BTW, it ran 13.3 at 104mph. It was about 90 degrees with very humidity.
Nice launch there, bigslim. A stickier track and we might be near seeing daylight under your LF tire--you're getting that nose up there real well. :)
 

· Registered
Joined
·
243 Posts
Discussion Starter · #7 ·
vvv90 said:
Look closer....It's the big white thing on his head.


Nice numbers so far Big Slim.....I'm thinking you should be able to kiss high 12's.
Thanks. I was thinking the same thing.
 

· Registered
Joined
·
314 Posts
That is one gorgeous car bigslim! I ran into someone trying to sell their black Muarauder awhile back, but they were awfully proud of it. The owner wound up cutting his losses, and traded in on a 300C.
 

· Registered
Joined
·
243 Posts
Discussion Starter · #10 ·
Mr.DJ said:
Lookin' good bigslim...which outfit widened your wheels? :thanks:
There is a place here in Michigan called WeldCraft. They are located in Northville.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top