[rogue]

As many of you know, I let Xenon borrow my vehicle for development of this kit a while back. I picked up my car this morning and saw it together for the first time today. I brought it to the Socal GTG today shortly after picking it up. The kit consists of a replacement front fascia, side skirts, rear deck spoiler, rear window spoiler, and rear valence. Various other parts are available including Bentley style Headlight covers, smoked tail light covers, smoked headlight covers, and a front lower valence. All parts are OEM ABS plastic.

Overall, I'm very pleased with the look of the car. Its aggressive, but not too tuner. Then again beauty is in the eye of the beholder, you be the judge. Public response has been astounding so far, I was pulled over by an officer early this morning whom wanted to ask questions about my mods. I thought I was about to get a ticket! :wink1:

I'm supposed to be moving tomorrow morning and have exhausted myself. I don't believe Xenon sells to consumers direct so you will probably find this kit being sold from some our forum sponsors soon. I need to take my vehicle back to them for a photoshoot this thursday. Hopefully I will have some updated info and some actual professional photos.

Any comments are welcomed. I'm curious of other 300 Owner opinion's, good or bad.

I plan on matching my grill to the lower front fascia mesh, but I'm still undecided on grills. So far Aspendog's grills are looking very attractive in conjunction with the front.

 

[402 Motoring]

I Can't Wait To Get My Hands On One. Thats Going To Set The East Coast On Fire!

 

[HEMEEE]

rogue, I'm glad you posted these, just what I wanted to see. The front looks soooooo much better without those headlight covers! And, as you already know, I love the lower rear... not fond of the spoilers at all. I think the grille James just did, with the center bar and not too deep-dish, would be the perfect finishing touch. Nice find!

P.S. I had a great time with you today, take it easy moving tomorrow!

 

[HEMI4ME?]

Spoilers need to go in my opinion - the srt8 one might serve a little better. The kit looks very nice. I like it a lot!

 

[TheDon300]

yea the grille that has to be put on that car is Aspens. If you look the bottom part of the kit is some what "deep dish" so if you have that theme going with the deep dish grille it would look great.

 

[smoove7410]

Spoilers + front end = :spank: :eek5:
Rocker panels and rear... pretty good, but I still prefer the VIP. :wave:

 

[Meister]

Rogue -

Executive summary: OUTstanding kit! Your car rocks!!

I can't get over how much I love that hammerhead shark mouth - side to side - lower vent, and its racing-style mesh. It must flow 50 times the air of our stock mini vents, even when opened. Engine and brake temps waaay down. (It's the only kit to date that has brought forth lust in der Meister, BTW...I want it...NOW.)

Longer version: Agree with both HEMEEE's & HEMI4ME's spoiler comments. Ditch the upper on, tone down the lower one by slipping an SRT8 spoiler on there.

Front end - no toucha da lower vent, period! It's perfect as is. As you said, match the lower vent's mesh in the appropriate grille frame and you've achieved perfection.

Sweet, sweet, car, Rogue - I'm very happy for you.

 

[HEMMISSEY]

I would take off the 2 rear spoilers IMO... and leave everything else the way it is.

 

[Mr_Price]

Nice...

Very nice! This is the best kit I've seen so far. I have to make it a unanimous decision on the spoiler though...it's too much for the 300. Everything else looks incredible.

 

[smhaaz]

Nice

Kit looks great have pics from yesterdays MG in HB. Wanted to ask are those covers on your taillights and if so were did u buy them?

 

[XCITsNU]

Rogue!

Looks awesome! Can you do us a favor and take a picture further away from the front end? I think this kit would look incredible on a Brilliant Black 300. Can't wait until someone with a BB does this to their 300 and posts some pictures. If I didn't have the SRT-8's, I'd be ordering this kit tomorrow! Maybe even commision a special edition mold done to bring the front facia sides in about 2-4 inches more on the bottom body line to make the look even more funneled, V scooped look to it. Very nice indeed!

 

[Sup]

looks like Xenon based their design on the Bentley Continental GT.

the only flaw I see is the area between the headlight and the mouth, but overall I like it. looks good :biggthump

 

[CoolV300C]

I really like the spoiler at the top of the rear window. I'd get one of those when they are available.

 

[HEMMISSEY]

Just came back from the DUB show here in San Fran, and I already saw 2 300c's with this kit..

 

[5point7]

Rogue,

Looks great. I like the kit - the side's, and the rear the most. It would be great if they did a similiar style lower front that would match the rear rather than a full front (just another option).

 

[300Con23s]

It does look like the front end of the kit is based on the Bentley GT. I think it looks good, whats the pricing on it?

 

[rogue]

Rogue,

Looks great. I like the kit - the side's, and the rear the most. It would be great if they did a similiar style lower front that would match the rear rather than a full front (just another option).

They do indeed have a lower front that matches the rear that is a lot more subtle and less costly.

 

[rogue]

It does look like the front end of the kit is based on the Bentley GT. I think it looks good, whats the pricing on it?

I'm going to guess you'll start seeing the kit floating around $2000, maybe less. It all depends what the retailers end up trying to get for them...

The driveway at my new house is not too keen on the front bumper. I've scraped it up already I'm going to lay down some latex paint on the concrete this weekend to prevent it in the future. Its a screwy driveway.

 

[swifty949]

not my cup of tea, glad to see there are more "new" products out there for the market. Is it the pics, or is the fitment off by the bumper and hood area?

 

[apbrian112]

i agree with the above posts... i like the kit but i don't like the spoilers. oh, and i think that you should highlight in your first post that all parts are OEM ABS and not fiberglass, this is a huge selling point. i know you put it in there, but like most people i just scrolled down to see the purty pics :silly: even though i just saw the kit in person during the M&G. oh and trust me, it looks even better in person!