Chrysler 300C & SRT8 Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
149 Posts
Discussion Starter #1
I'm new to all the rims that are currently available, and wanted to know from the more seasoned experts how these manufacturers rate. I've never heard of them, but I grew up in a time when Centerlines were the shizzle. :D '
Thanks for any help! These are the rims I'm considering.

http://www.discountedwheelwarehouse.com/Store_Detail.cfm?ID=132003&InfoID=2505&ShowLarge=True

http://www.discountedwheelwarehouse.com/Store_Detail.cfm?ID=132177&InfoID=2505&ShowLarge=True

http://www.discountedwheelwarehouse.com/Store_Detail.cfm?ID=110392&InfoID=2505&ShowLarge=True

http://www.discountedwheelwarehouse.com/Store_Detail.cfm?ID=110763&InfoID=2505&ShowLarge=True
 

·
Premium Member
Joined
·
1,269 Posts
steves300c said:
I'm new to all the rims that are currently available, and wanted to know from the more seasoned experts how these manufacturers rate. I've never heard of them, but I grew up in a time when Centerlines were the shizzle. :D '
Thanks for any help! These are the rims I'm considering.

http://www.discountedwheelwarehouse.com/Store_Detail.cfm?ID=132003&InfoID=2505&ShowLarge=True

http://www.discountedwheelwarehouse.com/Store_Detail.cfm?ID=132177&InfoID=2505&ShowLarge=True

http://www.discountedwheelwarehouse.com/Store_Detail.cfm?ID=110392&InfoID=2505&ShowLarge=True

http://www.discountedwheelwarehouse.com/Store_Detail.cfm?ID=110763&InfoID=2505&ShowLarge=True
I have owned 2 sets of Helo's and have been very satisfied with the quality. I have a set on my Navigator and just sold the ones off my C to get into D'Vinci Havoc XL's with some powdercoated centers...
 

·
Registered
Joined
·
17 Posts
It has been a very big debate, but the bolt pattern for the car is 5x115mm, some shops will try 5x114.3 aka 5x4.5. They will tell you that it is only .7mm different. If you look at the TIS wheels you will see they list the car as 115mm and they are working with Chrysler directly with the DUB edition cars.
 

·
Registered
Joined
·
1,269 Posts
Yup my TIS 03's are 5x115 with a offset of +18mm.
 
1 - 5 of 5 Posts
Top