Chrysler 300C & SRT8 Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
This is the error code I get. fan ctrl crct 2 I think. I had to plow through some deep snow and the light came on the next day. hopefully I just knocked a wire loose but the main harness looks ok. the engine fan won't come on either so it overheats when idling. any ideas where else I might have knocked a wire loose other than the one directly to the fan? any suggestions would be helpful.
 

·
Premium Member
Joined
·
6,769 Posts
Looks like there is multiple possible causes...

FUSED B+ CIRCUITS
(N112) RADIATOR FAN HIGH RELAY CONTROL CIRCUIT OPEN
(N112) RADIATOR FAN HIGH RELAY CONTROL CIRCUIT SHORTED TO GROUND
RADIATOR FAN HIGH RELAY
FRONT CONTROL MODULE


I attached the dealer service manual info...
 

Attachments

  • Like
Reactions: davidfhunt

·
Registered
Joined
·
9 Posts
Discussion Starter #3
That diagram at least shows where the ground is, which is most likely what I knocked loose. Hope I can track that down tomorrow.
 
1 - 3 of 3 Posts
Top