Chrysler 300C & SRT8 Forums banner
1 - 11 of 11 Posts

·
Premium Member
Joined
·
7,949 Posts
not slating the idea.....but why not just download the Chrysler manual which lists all the parts numbers on the diagram? They even have an LE book for our right hookers. That way you get the common part numbers and the obscure ones..... & its free .... this is for all 2008 models, including diesel & SRT8 http://dl.dropbox.com/u/23809418/2008LEParts.pdf Other years are available too, but this one is identical for 99% of stuff (barring the facelifted bits)
 

·
Premium Member
Joined
·
7,949 Posts

·
Premium Member
Joined
·
7,949 Posts
I have a problem with the dropbox link Bill,says there's a problem and will close down????
I just tried the link & it works ok as far as I can see.......anyone else had a go yet?

It immediately goes into downloading 11.2mb when I click it, so I'm puzzled.... I've also just tried the dropbox link in my earlier post too.....11.89mb without a hiccup :dunno:


does it make any attempt to download for you? Have you tried a download manager (eg "free download manager" http://www.freedownloadmanager.org/download.htm )
 

·
Premium Member
Joined
·
7,949 Posts
Might be a daft question, but how do I find out if I have an LE, LX or LUX version?

Sent from my HTC Desire S using AutoGuide.Com Free App

theoretically, all export cars are LE. LX are North American versions. This relates to the chassis/floorpan type of the car. Thus Chargers, Magnums & 300 cars are LX (or LE over here), whereas a Challenger isnt, (even though its almost identical)

Lux is a trim level, as is 'touring' (either the US v6, or our estates), as is 'heritage' etc

Youre confusing two different things!
 

·
Premium Member
Joined
·
7,949 Posts
I originally bought the CD and thought it had 2007, but it doesn't. For servicing I use the 2006 guide and 2008 European for parts. I guess as long as you get either facelift/non-facelift you should be good (for engine anyway).

I included a 2007 parts link (above)


ZIP '05 LX Service Manual (quarky42)
PDF '05 LX Service Manual (Fred)
PDF '05 LX Service Manual (Big Bruin)

PDF '05 LX Body Repair Manual (Fred)
PDF '05 LX Body Repair Manual (Sixpak)
PDF '05 LX Body Repair Manual (Big Bruin)

PDF '05 LX Parts Catalog (Big Bruin)

ZIP '06 LX Service Manual (Sixpak)
PDF '06 LX Service Manual (Fred)
PDF '06 LX Service Manual (Big Bruin)

ZIP '06 Parts Catalog (Fred)
PDF '06 Parts Catalog (Sixpack)
PDF '06 LX Parts Catalog (Big Bruin)

PDF '07 Parts Catalog (Sixpak)
PDF '07 LX Parts Catalog (Big Bruin)

PDF '07 Mopar Accessories (Sixpak)

PDF '08 LX Parts Catalog (Sixpak)
PDF '08 LX Parts Catalog (Big Bruin)

PDF '08 Police Upfitters Guide (Sixpak)
PDF '08 Chrysler Police Upfitter Guide (Big Bruin)
PDF '08 Challenger Body Repair Manual (Sixpak)

PDF '11 300 Body Repair Manual (Sixpak)
PDF '11 300 Parts Manual (Sixpak)
PDF '11 300 Parts Catalog (Big Bruin)
PDF '11 Challenger Parts Manual (Sixpak)
PDF '11 Challenger Parts Catalog (Big Bruin)
PDF '11 Charge Body Repair Manual (Sixpak)

PDF Mopar Performance Parts (Sixpak)
PDF REC Owners Manual (Sixpak)

Select Manuals
Thanks ekaz (scroll to bottom)

Owners Manuals
PDF '06 SRT8 Owner's Manual (Big Bruin)
Chrysler 300
Dodge Charger and Magnum


with thanks to the guys on LX hosting them
 

·
Premium Member
Joined
·
7,949 Posts
Guys

Just downloaded the 2008 one from Sox's site and I can't view anything. Do I need to cut this to disk first and use it from a CD. I thought I could just run default.htm and use it in IE (Chrome). Just wanted to get some torque wrench settings for Track Rod Ends.
what are you trying to look at it with? Whats your operating system?

normally its a compatibility issue - hit f12 & select '7' rather than 'edge' or settings more than 7 in 'document mode'

in any case, this is from the 2008 manual ....first number is NM, 2nd number is Ft/Lbs, 3rd number is in/lbs (but often shows as " - " (blank))

FRONT SUSPENSION FASTENER TORQUE


[SIZE=-1]DESCRIPTION

[/SIZE][SIZE=-1]N·m

[/SIZE][SIZE=-1]Ft. Lbs.
[/SIZE][SIZE=-1]In. Lbs.
[/SIZE][SIZE=-1]Engine Cradle Mounting Bolts
[/SIZE][SIZE=-1]185
[/SIZE][SIZE=-1]136
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Hub And Bearing Mounting Bolts
[/SIZE][SIZE=-1]68
[/SIZE][SIZE=-1]50
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Hub Nut - AWD
[/SIZE][SIZE=-1]213
[/SIZE][SIZE=-1]157
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Hub Nut - RWD
[/SIZE][SIZE=-1]250
[/SIZE][SIZE=-1]184
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Knuckle Dust Shield Screws
[/SIZE][SIZE=-1]10
[/SIZE][SIZE=-1]7
[/SIZE][SIZE=-1]89
[/SIZE][SIZE=-1]Lower Control Arm Cradle Nut
[/SIZE][SIZE=-1]176
[/SIZE][SIZE=-1]130
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Lower Control Arm Ball Joint Nut - AWD
[/SIZE][SIZE=-1]68 + 90° TURN
[/SIZE][SIZE=-1]50 + 90° TURN
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Lower Control Arm Ball Joint Nut - RWD
[/SIZE][SIZE=-1]68 + 90° TURN
[/SIZE][SIZE=-1]50 + 90° TURN
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Tension Strut Cradle Nut
[/SIZE][SIZE=-1]176
[/SIZE][SIZE=-1]130
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Tension Strut Ball Joint Nut
[/SIZE][SIZE=-1]68 + 90° TURN
[/SIZE][SIZE=-1]50 + 90° TURN
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Shock Absorber Clevis Bracket Lower Bolt - AWD
[/SIZE][SIZE=-1]174
[/SIZE][SIZE=-1]128
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Shock Absorber Clevis Bracket Pinch Bolt - AWD
[/SIZE][SIZE=-1]61
[/SIZE][SIZE=-1]45
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Shock Absorber Lower Mounting Bolt - RWD
[/SIZE][SIZE=-1]174
[/SIZE][SIZE=-1]128
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Shock Absorber Upper Mounting Nuts
[/SIZE][SIZE=-1]27
[/SIZE][SIZE=-1]20
[/SIZE][SIZE=-1]239
[/SIZE][SIZE=-1]Shock Absorber Shaft Nut
[/SIZE][SIZE=-1]95
[/SIZE][SIZE=-1]70
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Stabilizer Bar Link Upper (Shock) Nut
[/SIZE][SIZE=-1]128
[/SIZE][SIZE=-1]95
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Stabilizer Bar Link Lower Nut
[/SIZE][SIZE=-1]128
[/SIZE][SIZE=-1]95
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Stabilizer Bar Isolator Retainer Bolts
[/SIZE][SIZE=-1]60
[/SIZE][SIZE=-1]44
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Stabilizer Bar Heat Shield Screws
[/SIZE][SIZE=-1]7
[/SIZE][SIZE=-1]5
[/SIZE][SIZE=-1]62
[/SIZE][SIZE=-1]Upper Control Arm Ball Joint Nut
[/SIZE][SIZE=-1]47 + 90° TURN
[/SIZE][SIZE=-1]35 + 90° TURN
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Upper Control Arm Body Nuts
[/SIZE][SIZE=-1]75
[/SIZE][SIZE=-1]55
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Outer Tie Rod Ball Joint Nut
[/SIZE][SIZE=-1]85
[/SIZE][SIZE=-1]63
[/SIZE][SIZE=-1]—
[/SIZE][SIZE=-1]Tie Rod Jam Nut
[/SIZE][SIZE=-1]75
[/SIZE][SIZE=-1]55
[/SIZE][SIZE=-1]—
[/SIZE]
 

·
Premium Member
Joined
·
7,949 Posts
windows 7 / 8 doesn't like the Service Manual browser (SVG View) - install SVG view, then open the file 'default' by double clicking it. That should get you into the manual's menu.....as I said, when you open the manual menu screen, hit F12, then choose 7 in the compatibility "document mode" mode that opens....DONT shut the compatibility screen while you use the manual
 

·
Premium Member
Joined
·
7,949 Posts
am i blind or cant seem to see 2008 crd models there?... im after part number for O2 sensor circuit range/performance bank 1 sensor 1 (P2A00)
yes youre blind

the link for 2008 including CRD is in post number 14, but in fairness it appears to be dead nowadays. I'll see if I can upload it. If it appears I suggest you download and save it, as I may not be able to retain a file that size here - I had to cheat to get it to upload.........
 

Attachments

1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top