Chrysler 300C & SRT8 Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
I did a pretty significant tear down of the top end of my 07 3.5L AWD. The intake, especially the short runner butterfly valves were severely gummed up
175717

I thoroughly cleaned the inside of the intake, especially the shaft between the ports, using carburetor cleaner and simple green, as well as a variety of brushes. Finally I used a pressure washer to blow everything out.
175718

I decided to install a clear fuel filter into the PCV line to see what is coming through and how fast it is happening.
175719
 
1 - 1 of 1 Posts
Top