Chrysler 300C & SRT8 Forums banner
1 - 15 of 15 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I was just wondering if anyone has installed quad (2 outlets on either side in the rear) tips on a 300C? I have noticed it on a particular 300c and was just wondering if anyone knows which tips to use/where to buy them/ and how they fit??

any information is appreciated
 

· Registered
Joined
·
2,615 Posts
Different Look...my style for sure...

I too,have seen several pictures of the "Dual Tips",and I like 'em...guess it's my wierd sense of taste again...Shouldn't be THAT difficult in having them fit.Would be a different look..and you KNOW I like DIFFERENT lol
 

· Registered
Joined
·
2,131 Posts
Imo

look like the caddy sedans

Nice, big 4" Magnalfow tips are my style (IF they ever show up)
 

· Registered
Joined
·
1,006 Posts
id like some nice quad tips as well. been looking forever, and really cant find much except some on ebay, but i question the quality of them. borla has some nice ones, but they run about $100 per side which is a lil expensive for just tips if you ask me. please let me know guys, and ill do likewise as id love to get some of these!
 

· Registered
Joined
·
2,615 Posts
PixelPusher said:
I've got "Sebring" quad tips on my magnaflow system $90 per side for the tips but they look hot! heheh at least I think so.. nothin but compliments so far.
click on my car in my sig and it will take you to my photo gallery.
Exhaust tips look nice. Did you have to modify the lower bumper fascia to make them fit ? Or did you just install 'em,
and let 'em rest against the bumper ? Looks like your muffler is hanging low also
...
 

· Registered
Joined
·
592 Posts
Lik2race said:
Exhaust tips look nice. Did you have to modify the lower bumper fascia to make them fit ? Or did you just install 'em,
and let 'em rest against the bumper ? Looks like your muffler is hanging low also
...

yes the bumper fascia was cut to allow both tips to tuck up a bit into the bumper like stock. The polished Magnaflow mufflers hang lower than factory and look sweet IMHO. ;) the pictures were taken from a pretty low angle (around 2' at the tripods lowest setting) so they're more obvious than when you're standing up walking around the car.
 

· Registered
Joined
·
4,605 Posts
Lik2race said:
Exhaust tips look nice. Did you have to modify the lower bumper fascia to make them fit ? Or did you just install 'em,
and let 'em rest against the bumper ? Looks like your muffler is hanging low also
...
Here are some pics that have been posted before. From what I can tell, the bumper fascia needs to be modified to make it fit right.



 

· Registered
Joined
·
1,006 Posts
damn those tips on the startech are exactly what i was looking for! anyone have any idea of how to get them, or some contact info for startech? they dont look polished, but they are still sick nonetheless.

as for cutting the bumper to accomodate the dual tips, i plan on just switching out my C bumper with a base model bumper (as i dont like the chrome piece on the C bumper anyways).

now if i can just find out what tips these are!!!
 

· Registered
Joined
·
4,605 Posts
lennoxavesosa said:
damn those tips on the startech are exactly what i was looking for! anyone have any idea of how to get them, or some contact info for startech? they dont look polished, but they are still sick nonetheless.

as for cutting the bumper to accomodate the dual tips, i plan on just switching out my C bumper with a base model bumper (as i dont like the chrome piece on the C bumper anyways).

now if i can just find out what tips these are!!!
Startech is a German company. Might be hard to get the tips.
There is a Startech North America office located here.
Try calling them.

CRD North America, Inc.
4040 Campus Drive
Newport Beach, CA 92660
Telefon (949) 851-1006
Telefax (949) 797-9177
http://www.startech.de/p15be.htm
http://www.startech.de/s06e.htm



 

· Registered
Joined
·
2,615 Posts
1 - 15 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top