Chrysler 300C & SRT8 Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter #1
So i installed 6000k HID Fog light kit today, it was a plug and play just pluged into the original harness goes through the ballast and goes to the new light bulb, no ground or power wires. Everytime i turn on the fog lights i lose all radio reception on my FM Tuner, anyone have this problem, i have the ballast mounted on the inner front bumper right next to the fog light hole itself. I cant figure it out. The kit i used was a XenTec hid conversion kit. thanks:pat:
 

·
Registered
Joined
·
683 Posts
never head of this before. I have HID fogs and no problems with my FM radio. You can try shielding the Fog light wires by wrapping a wire around the outside of the wires going to and from your fogs.
 
1 - 2 of 2 Posts
Top