Chrysler 300C & SRT8 Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hello All. New member, first post.
I've replaced the front brake rotors without any issues. I've removed the rear calipers and bracket. Do I need to remove the bearing hub to remove the rear rotors? They won't budge so I thought I better ask. Any information would be appreciated.
 

·
Registered
Joined
·
457 Posts
what you have to do is wiggle the rotor as the park brake has shoes on the inside of the hat on the rear disc its a bit of a PITA but no specila tools required. I did mine you just have to give yourself time to do it. other then that you can try engaging the P brake and releaseing it a cupple of times and try to remove it again.
thats how i did mine wasnt to hard.
 

·
Registered
Joined
·
34 Posts
i just did my rotors and pad today, and the for the rear ones, i adjusted the parking brake to loosen the drag on them making it easier to remove the rotors, and then readjusting the parking brakes after.
 
1 - 4 of 4 Posts
Top