[hikkan]

Alright, I've tried looking at multiple forums for the answer on how to remove the stock radio, but now I figure i would post a message and see if anyone would respond. I've only removed radio's on Chevy's and I cannot seem to figure out how to remove the radio for the 300. I believe its just a stock 300 and I would really appreciate it if someone could tell me how to remove the radio. All help is appreciated.

 

[mileshoover]

Pull out the ashtray or whatever is in its place beneath the vertical part of the console. Reach in with your hand and carefully pull up and outward. The front fascia plate will come off; it's only on there with clips, and goes back the same way.
Be careful, it's plastic and expensive to replace.


Once that is off, you have access to the radio, etc. When you pull it out, you can remove the wiring harness and antenna. Some after-market places offer them now to fil many different radios if needed.

I believe this info was previously posted, but may have scrolled off. Did you check the Search function? That's the best way to find stuff on these forums.

 

[hikkan]

thanks!....